Lockwood 7444 Keyed Pocket Door Lock - Demand Skyrockets

Our Lockwood 7444 keyed Pocket Door Lock is in high demand. We are almost sold out of our current inventory.

This phenomenal product continues to break all sales  records and is keeping us very busy indeed.

The simple installation is proving a hit with builders and homeowners alike. It is designed to fit in a 2-1/8" cross bore, so modifying an existing door is simple. The holes in the door edge are 1" diameter and it is necessary to drill the extra hole below the bolt for the pull handle/plunger.

The factory model is designed for 1-3/8" thick doors. If you intend to install to a thicker door (like a 1-3/4" thick door), currently you are required to countersink the cross bore by at least 1/8" on each side.

We are working on a modification kit that will allow installation to a thicker door, but it is a time consuming process to get perfect. We will not release the kit until it is perfect.

As of this writing we have 6 units in SPDP (Satin Nickel) and 6 units in CPDP (polished Chrome), with new inventory expected in about 4 weeks.

Thank you for continuing to purchase this wonderful product.