Pocket Door Repairs

Being a professional contractor who specializes in locksmith services and door repair services and products, allows me to offer unique and specialized products and services to a varied range of clients.

We have been continued members of the Home Advisor network, coming on 12 years, ever since it's early inception as Service Magic. The parent company of Home Advisor, ANGI Repair Services, recently completed their acquisition of Angie's List and have melded the Angie's List network into the Home Advisor network to create the largest lead generation service online.

We receive a great many leads from the network and over the years have been lucky to receive 370+ reviews from satisfied clients.   (View Our Home Advisor Page Here And Read Our Reviews)

One of the not so common requests we receive is "Repair Pocket Doors".

It has become an interesting and increasing number of inquiries from customers who suffer from pocket doors that drop wheels or tracks not holding sufficiently longer and doors not straight.

There are obviously far too few tradespeople in my region, capable enough to repair pocket doors.

Below, find some images we took on a recent pocket door repair. The customer could not find anyone to perform the repair (before me) with almost all contractors they contacted, refusing to repair stuff preferring to only tear out and replace. Doing such, would add significant cost to projects and take much longer than just a repair.

before image

 This shows the unbalanced door

before image - opposite side

preparing for removal

 Removing the trim means cutting along caulk and existing paint line, to minimize damage

Cutting away caulk and paint on edges

cutting caulk and paint on interior edges

Cutting caulk and paint from closed edge

carefully removing existing trim

trim almost removed

remove overhead trim and rail

dont forget to remove all the little nails

In the images above, we display the methods we use to create as little mess as possible and performing the dismantle without the need to cut into the wall, we always survey and estimate all repair jobs in advance and inform the customers that we are not painters and do not paint and caulk.
We always tell the customer that they may need to caulk and paint afterward.

Being careful to cut the edges of the trim and frame will allow you to pull the trim without affecting too much of the existing paintwork,

Remove the trim from top and sides of one side of the door only. Dont forget to remove all the little nails you find, to avoid having difficulty taking the door out and difficulty reattaching the trim after completing your repair.


We deliberately do not show the inside workings in this example repair because we dont want to give the whole farm away.

The next images are the after images with the repair completed and the trim reattached. You can see, that using this method can save you a lot of money and heartache. We reattached the trim using our nail-gun and the end result is a repaired and suitably operating pocket door.

 Here you can see the reattached trim and the slight damage to the paintwork, that the customer will fix themselves.

 This is the completed door from inside the bathroom

 Another look from inside, post repair

And this is the look after cleanup from the vanity side of the bathroom.


The entire project took about 3 hours to complete and did not involve any new parts, apart from some nail-gun nails.