Crime Report II

This months Crime Report is for the Kirkwood MO municipality. November 1 - 17, 2008.

5 x Breaking & Entering
14 x Property Destruction
1 x Robbery
42 x Larceny
11 x Fraud
9 x Vehicle Thefts

Breaking & Entering is direct evidence of forced entry.

Property Destruction is direct evidence of damage to property by forced entry or other damages to site.

Robbery is direct personal crimes like holdups.

Larceny is "taking and carrying away of tangible personal property of another by trespass with intent to permanently (or for an unreasonable time) deprive the person of his interest in the property."

Larceny includes property entries with no signs of forced entry, including unauthorised key holders.

Fraud is evidence of forgery and other frauds.

Safes

Choosing a safe is often difficult. I have been asked many times over the years to make a recommendation to customers wishing to purchase a safe.

Before making a recommendation, I feel it necessary to ask some specific questions to a customer to help in determining a suitable product to recommend.

Many people do not understand the ratings systems for safes, probably because there is no written industry standard.

In the early 1990's, I worked for one of Australia's oldest manufacturers of quality safes, Kelly Safe Co PTY LTD. (they closed down in 1995, I believe). Kelly safes were considered a staple of the Australian landscape for about 100 years previously. They manufactured impressive quality safes for many of Australia's institutions, banks, high-society clubs, hotels etc.

The increasing competition from foreign products combined with the significant increase in raw materials cost, saw Kelly become less competitive in later years.

I learned much from my short time with them about how to grade safes.

There are many classifications of safes that are determined by each individual country/locallity as suitable for local conditions. The leading tester in the world (most respected) is known as the Underwriters Laboratory.

The questions I like to ask my clients are:

1. What approximate cash value of personal documents, jewellery, bank notes etc are you looking to secure?

This determines what grade of safe would be suitable for the contents.

2. Approximately how big (dimensions) would the individual pieces of content be for storage?

This determines the necessary internal dimensions of the recommended safe.

3. Are you looking for Burglary Protection, Fire Protection or both?

4. Would you prefer a bolt down facility, free-standing, on castors, wall-mount, floor mount, vault etc?

5. How much are you looking to spend?

The most important question is question #1, because this separates the designations of safes from each other and directly guides a professional to make the most suitable recommendation.

In California, the CDOJ (California Department Of Justice) uses the following terms:

California Department of Justice Burglary Rating (CDOJ)

Regulatory Gun Safe StandardsDOJ regulatory standards require a gun safe to meet either:
All of the following requirements:

1. Shall be able to fully contain firearms and provide for their secure storage.
2. Shall have a locking system consisting of at minimum a mechanical or electronic combination lock. The mechanical or electronic combination lock utilized by the safe shall have at least 10,000 possible combinations consisting of a minimum three numbers, letters, or symbols. The lock shall be protected by a case-hardened (Rc 60+) drill-resistant steel plate, or drill-resistant material of equivalent strength.
3. Boltwork shall consist of a minimum of three steel locking bolts of at least ½ inch thickness that intrude from the door of the safe into the body of the safe or from the body of the safe into the door of the safe, which are operated by a separate handle and secured by the lock.
4. Shall be capable of repeated use. The exterior walls shall be constructed of a minimum 12-gauge thick steel for a single-walled safe, or the sum of the steel walls shall add up to at least .100 inches for safes with two walls. Doors shall be constructed of a minimum of two layers of 12-gauge steel, or one layer of 7-gauge steel compound construction.
5. Door hinges shall be protected to prevent the removal of the door. Protective features include, but are not limited to: hinges not exposed to the outside, interlocking door designs, dead bars, jeweler’s lugs and active or inactive locking bolts.

or All of the following requirements:

1. Is listed as an Underwriters Laboratories Residential Security Container;
2. Is able to fully contain firearms;
3. Provides for the secure storage of firearms.

BURGLAR SAFES:

Burglar safes are usually made of solid steel plate or a combination of solid steel and composite fill material such as concrete. These safes are divided into categories based on the level of protection delivered and the testing endured. Here we will discuss only seven classes: B-Rate, U.L. RSC Rating, B/C Rate, C-Rate, U.L. TL-15, U.L. TL-30 and TL-30 X6.

B-RATE SAFES (ALSO U.L. RSC, RESIDENTIAL SECURITY CONTAINERS):

B-Rate is a catchall rating for essentially any box with a lock on it. The safe industry had an unwritten standard of ¼ inch body, ½ inch door. As steel prices (and shipping costs) increased manufacturers tried many things to reduce their costs. No tests are given to provide this rating. When buying a B-rate safe, look at things such as lock work, hard plates, and relocks.

U.L. Residential Security Container rating (RSC) - This UL rating is based on testing conducted for a net working time of five minutes, on all sides, with a range of tools. See U.L. TL-15 and TL-30 descriptions below for "net working time" description.

B/C-Rate Safes

This is a catchall rating for safes with at least a 1/4" steel body, 1/2 inch door PLUS additional 10 or 12 guage metal layers where composite fire resistant material is also deployed. No tests are given to provide this rating. Look at the lock work, relocks and other features when making your decision.

C-Rate Safes

This is defined as a ½ inch thick steel box with a 1-inch thick door and a lock. As before, NO tests are given to provide this rating. Look at the lock work, relocks and other features when making your decision.


The Underwriters Laboratory information:

Underwriters Laboratories Inc. (UL) Ratings
http://www.ul.com

TL-15

Safes given a U.L. TL-15 rating have all passed standardized tests defined in UL Standard 687 using the same tools and usually the same group of testing engineers.Construction Requirements

• U.L. listed Group II, 1 or 1R combination lock.
• 750 lbs. minimum or comes with instructions for anchoring in a larger safe, concrete blocks or on the premises where used.
• Body walls of material equivalent to at least 1" open hearth steel with a minimum tensile strength of 50,000 P.S.I.
• Walls fastened in a manner equivalent to continuous 1/4" penetration weld of open hearth steel with minimum tensile
  strength of 50,000 P.S.I.
• One hole 1/4" or less, to accommodate electrical conductors arranged to have no direct view of the door or locking mechanism.

The label means that the safe successfully resisted entry (i.e. opening the door or making a 6" square opening entirely through the door or front face) for a NET working time of 15 minutes using "…common hand tools, drills, punches hammers, and pressure applying devices." Net working time means simply "when the tool comes off the safe the clock stops". There are over fifty different types of attacks that can be used to gain entrance into the safe. Usually they will try only 2 or 3 based on what they know about the product, and they know a lot.

TL-30

Construction requirements are identical to the TL-15 above. Tests are essentially the same as the TL-15 tests except for the net working time. Testors are allowed 30 minutes and a few more tools (abrasive cutting wheels and power saws) to help them gain entrance. The label signifies the testors were unable to open the door or make a 6" square opening entirely through the door or front face within 30 minutes. Keep in mind these engineers have the manufacturing blue prints and can disassemble the safe being tested before the test begins to see how it works. They know their stuff. TL-30 x 6 - The TL-30 (30-minute) test is conducted on all six (6) sides of the safe.

Other Considerations

When you begin the search for a safe it is a good idea to speak to your insurance agent and see if a particular type of safe will reduce your insurance costs. Many times you can justify the additional expense of a higher security safe because of the premium reduction. Remember no safe is burglar proof, you are buying time. The longer it takes to break in the greater the chance to be caught, and thieves don’t like to get caught.

---

10 Things You Didn't Know About UL's Safe Testing

1. The best safecrackers in the business never steal a penny. They work for UL.
   
   
2. UL has been testing and certifying safes for more than 80 years. The first safe tested for burglary resistance was in 1923 and the first bank vault in 1925.
   
   
3. Chisels, wenches, screwdrivers, power saws, cutting torches, crowbars, abrasive cutting wheels, jackhammers, even specified amounts of nitroglycerin are just a few of the "tools" UL technicians use during a safe attack. The idea is to test safes to worst-case scenarios. They use tools that could be found at any construction site or hardware store. They also analyze blueprints as if the burglar might have blueprints of the design and attack its weakest points to evaluate the safe for certification.
   
   
4. UL's safe attack tests are conducted by a two-person crew. The object is to create an opening large enough to withdraw "valuables" (anywhere from 2- to 6-square-inches on a safe and up to 96-square-inches on a vault), activate the locking mechanism so the door opens or to cut as many bolts from the door as necessary to pry it open before the time specified in the rating requirement expires.
   
   
5. Safes are rated for their resistance to attack against specific tools for a set period of time. There are a dozen different ratings, everything from ATM machines, to gun safes to bank vaults. For example, a safe that bears a Class TRTL-15X6 rating, which might be found in a jewelry store, should resist a hand tool and torch attack for a minimum of 15 minutes. A TRTL-30X6-rated safe, which would protect important documents or store money, should withstand an attack for 30 minutes. The ultimate safe rating-a TXTL60-should withstand an hour's worth of attack that includes the use of 8 ounces of nitroglycerin.
   
   
6. Because of the size and weight of certain safes and vault doors, it is not always practical to have the product shipped to UL's laboratory locations. UL's burglary protection staff has traveled to destinations such as Japan, France, Israel, England, Finland, Taiwan and India.
   
   
7. In addition to burglary protection ratings, UL also rates safes for their fire resistance protection. Class 350 safes protect paper documents, Class 150 safes protect magnetic tape and photographic film, while Class 125 safes protect floppy disks. In addition to the Class Rating, safes obtain an hourly rating for fire resistance-anywhere from 30 minutes to four hours.
   
   
8. Another cool test UL runs on safes is an impact test. This test simulates a safe falling though multiple stories of a building-resulting from a fire that has weakened the structure. After the safe is heated to 2,000 degrees Fahrenheit in a furnace, it's raised three stories and dropped onto a pile of bricks. In order to meet the requirement, the safe can't pop open. Temperatures inside can't rise to above 300 degrees Fahrenheit and sample papers left inside have to be readable.
   
   
9. The specialized suits you sometimes find technicians wearing are not just for show. Their entire ensemble, including protective coat, helmet and gloves, protects the crew against the adverse effects of sparking. After all, safety can't be taken for granted, even within the walls of UL.
   
   
10. Safes are just one of the 19,000 product categories that UL tests and certifies. While UL's burglary protection team cracks combinations, shatters glass and fires .44-caliber bullets at body armor, other UL engineers and technicians keep busy testing everything from TVs, coffee makers and holiday light strings to fire extinguishers, medical CAT scan equipment and building materials.

(source...)

What Brands Of Locks Do You Recommend?

Being in the locksmith business, I am obviously asked often for recommendations on types and brands of hardware.

Having been in the industry for over 25 years, does not necessarily make me an expert, but having used and installed many different brands over the years, I do have my favorites.

Previously to the last 3 years, I worked in the USA almost 20 years ago and the products available back then were significantly better quality than what is generally found today.

Recently, I have been quite impressed with the Cal-Royal brand of products. In fact my signature product Bilock, uses a Cal-Royal brand deadbolt as it's choice of hardware to re-brand with the Bilock name because of the superior quality of manufacturing, the ease of installation and the aesthetic finishes of the trims.

Pictured here, is the HIL series residential entrance kit.

Meets ANSI A156.2 Series Grade 2 requirements "UL" listed for 3 hour doors 6-pin solid brass "C" keyway standard

Unique individual spring on exterior and interior side of lever to prevent lever sag Simultaneous retraction on both latch and deadbolts from inside by turning the lever in a panic-proof exit situation

Pictured here, is the Genesys Series commercial lever sets.

Meets or exceeds standards of BHMA/ANSI A 156.2 Series 4000, Grade 1 requirements Standard 6 pin solid brass "C" keyway "UL" listed for 3 hour fire labeled doors Extra Heavy Duty Cylindrical Lever Sets (Clutch Style)

Thru-bolted assembly through door with separate spring cage for each lever Featuring CLUTCH System, free turning handle to deter breaking of the handle Key removable outside lever for fast rekeying

Pictured here, is the M series commercial mortise lock.

Rust-proof heavy duty 2 3/4" Backset lock case Individual spring to prevent lever sag, easily reversible Forged brass lever handles exceed requirements of ADA Auxiliary latchbolt

Armored front plate conceals lock mounting screws 1" Throw Heavy Duty Deadbolt with Anti-Saw Hardened Pins Heavy Duty 3/4" latchbolt with anti-friction latch, easily reversible Heavy duty stopworks

There are many choices today when selecting hardware for your applications. This is but one choice worth considering.

(source...)

Lego Safe

You might think that a Lego safe would be easy to open. Maybe just remove a few bricks and you’re in. But that’s not the case with this thing, the cutting edge of safe technology. The safe weighs 14 pounds and has a motion detecting alarm so it can’t be moved without creating a huge ruckus. The lock takes five double digit codes to open it. That's into over 305 billion different combinations. It even boasts an electronic status display showing the numbers as you turn the combination dials. When you enter the combination, the door electronically opens itself. It’s a great place to store all of your valuable geek stuff. Check out a video below.

Biometric Voice Activated Safe

Yes! This is a novelty item. Especially for the holiday season.

Just say the word! This ultra-secure, high-tech safe only opens at the sound of your voice.

• Uses voice-recognition technology
• Prompts you for biometric verification
• Identifies the sound waves of your voice
• Door opens automatically
• Provides hands-free access
• Alarm sounds when someone tries to physically open it
• Features a handy shelf and drawer

Keep your secret treasures secure in this cool, cutting-edge safe.

Ages:	8 +
Batteries:	Requires 3 AA batteries (not included)
Dimensions:	5.75" L x 6.5" W x 7.75" H
Weight:	1.4 Pounds
Made In:	China
Made Of:	Plastic
Model Number:	0205606
Gift Box:	Available

(source...)

Kwikset SmartCode Signature Series

Kwikset have just released this new elegantly designed combination/key deadbolt lock using the recent Smart Key cylinder product.

The Smart Key cylinder product is so designed to mimimize the threat of key bumping that has gained much notoriety in society today.

This new design does not require the additional hole drilling that some other (more expensive) brands require.

You can plainly understand the benefits of this product. No need to hand over a key to your cleaner or tradesman, simply give them a code for entry.
When their task is completed or they are no longer in your employ, simply change or delete their code.

Available in Venetian Bronze, Lifetime Brass and Satin Nickel.

(source...)

Bilock (A Closer Look) Part II

Pictured below is Bilock's Rim cylinder. This is the type of cylinder that you will see used for surface mounted locks like panic exit devices, gate locks etc.

Here you can see the technical drawing dimensions of Bilock's Rim cylinder.

Pictured here is a typical application of Bilock's Rim cylinder.

Bilock Rim cylinders sell for about $125 each.

Bilock (A Closer Look)

Interest in Bilock products certainly seems to be increasing, at least for me. I am seeing a significant increase in stock movements, which leads me to write todays piece.

Pictured to the left is Bilock's Schlage cylinder. This cylinder is designed to retro-fit in almost the entire range of Schlage products.

Schlage products use varying length and style connecting tail-pieces, to suit their broad range of products. In the residential market, the cylinders are generally all the same with varying types of connecting tails for the different models of deadbolts and entrance locksets.

Bilock's unique ability to design it's cylinders, maintaining the highest standards while using original hardware, offers customers a significant advantage and savings by negating the need to replace the hardware.

Example: Yesterday, I was called to a property to change locks. The customer required restricted keys to prevent unauthorized duplication of keys. All existing locks were Schlage brand. I was able to maintain using the existing hardware and simply replace the inner cylinders only, maintaining the existing character and aesthetics and significantly limiting the expense normally required for new locks. Result: 100% Fully secure, bump proof, pick proof locks with keys that can only be created after receipt of a correctly authorized letter.

Pictured to the left are the technical dimensions of the Bilock Schlage style entrance cylinder.

Bilock Schlage type entrance cylinders sell for about $70 each.

RoboDog Portable Guard Dog

This excellent product would appeal to apartment dwellers who desire the protection that an animal can provide but without the food bill and cleaning or walking that needs to be done for it's upkeep.

The Robo-Dog Barking Alarm Kit simulates a real, angry dog barking, making it the perfect watchdog for anyone home alone. Use the included Keychain Remote to scare off intruders at the touch of a button!

Product Uses

• Use Robo-Dog to scare off prowlers
• Protect your home while you are on vacation!
• Take it with you! Renters this is an excellent security system for you! It moves with you!
• Use Robo-Dog while you're away!

Product Features

• Built -in X10 transceiver !
• 100 foot range
• Adjustable Volume
• Includes 3 "Beware of Dog" window stickers
• 30 second auto turn off
• Keychain remote control

$59.99

(source...)

Types Of Locks Part II

Many people are unaware as to the differences between residential and commercial lockset backsets.

The "Backset" is the distance between the edge of the door and the center of the keyhole.

The diagram below shows what I mean:

The two common backsets are:

Commercial = 2-3/4" (2.75"/70mm)

Residential = 2-3/8" (2.375"/60mm)

Many latches and bolts (commonly referred to as "backsets" in the trade) are available in adjustable lengths for the residential market.

Commercial backsets are supplied in as above, standard. Should you require a different backset length, you need to be very specific when you order.

There are also various times when a 5" (127mm) backset will be requested. These are usually for significantly more expensive and better quality mortise vestibule type locksets, although some residential brands also manufacture these lengths. Likewise, you can specially order backsets that enable "center of the door" fittings. This enables a residential door to have the handle positioned in the center of the door. Sometimes the aesthetic appeal of a center mounted handle, can add significant value to the look of a door.

Types Of Locks Part I

Determining the type of lock you have on your door can greatly assist your locksmith professional to determine the better course of action for repair or replacement of the hardware on your doors.

Understanding the differences between lock styles is fairly simple and easy for anyone to distinguish.

We will try to describe some of the popularly found lock styles in this and future posts, to assist customers wishing to source for repair or replacement products.

These are the commonly used cams found on the back (rear) of most threaded mortise cylinders. Identifying this cam on your cylinder requires you to remove the cylinder from the door.

This is a brief diagram of a standard mortise type cylinder found in commercial and residential vestibule mortise locksets. The critical measurement here is "C", where by the length of the cylinder determines the width of your door.

It is necessary to remove this cylinder from your door, to be able to determine the correct length. Standard lengths are 1.125" & 1.25".

Special order cylinders can be purchased in longer lengths if required.

Making Keys To Cars

Many locksmiths across the world are often called upon by customers to duplicate or re-create original keys for cars, trucks, buses, motor homes, prime movers, motorcycles and other motor driven equipment.

Since 1995, many automobile manufacturers have included advanced security features to their products, in an attempt to provide their customers with state of the art protection, reduce incidence of theft and also to provide advanced diagnostics information for mechanics and repairers.

When the auto industry started evolving, many customers found themselves only able to duplicate modern auto keys at their respective dealerships. Not Anymore!

Thanks to the excellent research and development of companies like Advanced Diagnostics, locksmiths across the world have been able to purchase suitable equipment to enable the duplication and origination of automobile keys.

There have also been many advances in the locksmith industry in relation to the ability to make keys for cars without the need to remove lock cylinders. Tools like EEZ Readers, Determinators etc, reduce the need to dismantle doors or ignitions, significantly speeding up the time required to perform key origination requests.

Many locksmiths posess the ability to code cut keys to customers providing the original keycode for their vehicles. But, the greater majority of customers never recorded the original keycode information after initial purchase, causing increased expense when the need arose to make new keys. In recent times, many automobile manufacturers have started to produce their vehicles without keycodes embossed on the lock cylinders and dealers usually only maintained records for up to 5 years.

A new law is about to come into effect in California next year thanks to the efforts of the National Automotive Services Task Force (NASTF), that will require all dealer representatives to provide 24 hour keycode assistance to customers. The sticking point in this new legislation is that only approved locksmiths (ALOA members) and other specific trades, will be allowed to access this information. No doubt, the ability to access vehicle codes will impact the industry with likely increased prices for the purchase of code information, there are a few locksmiths who will never require the codes because, the level of training they have completed will enable them to provide services to customers in spite of the attempted industry regulating efforts of NASTF.

When customers seek new keys for their vehicles, I recommend they seek out a qualified locksmith professional with the appropriate transponder programming equipment, who can offer services only a properly trained technician can perform.

At Locks210.com, we consider ourselves reasonably proficient in many locksmith duties and tasks, however we are not currently suitably qualified or equipped to provide the expert assistance necessary to perform automotive key manufacturing requests.

We strongly recommend the services of our colleague Patrick Chapman of St Louis Lock & Key (314)494-2510.

If you are located in Vancouver, British Columbia or the surrounding area, we have absolutely no hesitation in recommending Mike Behr of Behr Lock Inc (604)880-9891.

If you are located in the Winnipeg, Manitoba region, we strongly recommend Darren Ingleson of Wildwood Lock & Security (204)791-7911.