Continuous Hinges _ Not Just For Aluminum Shopfront Doors

We are often called in by homeowners to find cost-effective solutions for door repairs.

Often a home owner may be trying to sell their property and an inspection reveals items that require to be fixed before a sale can take place.

The images below show a basement door on a 100+ year home, where the door butts up against the cinder block foundation wall. this door opens inward and as you can see, the top of the door hits the floor joist, not allowing the door to travel fully.

The home owner had attempted to simply replace the hinges, but their attempted repair failed because the wood in the frame was rotten and the screws wouldn't hold.

Typically in this situation, the recommended solution would be to replace the entire door and frame. that can be a costly endeavor, especially because many similar situations require custom made doors and frames, that are often quite dear.

 The first image shows the door detached from the frame at the bottom and you can see the top of the door is taller than the floor joist.

 the second image shows the external side of the same door.

You can see that the old door is in a state of disrepair and the hinge at the bottom has nothing to screw to.

We could have simply moved the hinge higher to a new location, but we couldn't be sure that the wood was not also rotten there too.

Our solution is a long term fix because the continuous hinge we installed (which is more often used to repair shopfront aluminum doors) comes with a 50 year warranty.

The completed installation of the continuous hinge, required us to cut about 4" from the top of the hinge.

The continuous hinge is screwed on like a typical piano hinge, in that it applies completely along the edge of the door and frame.

The correct installation of a continuous hinge ensures long term use. they are held to both door and frame using about 10 screws on each leaf. We installed it to the surface of the door and frame, which allowed us to screw into fresh (not rotten) wood.

The finished result looks great and the door works easily like it should.

Total time for repair ~2 hours.



Continuous hinges are not cheap. But quality products are often pricey and come with sometimes lifetime guarantees.

We continue to install increased quantities of continuous hinges to shopfront aluminum doors, where the top and/or bottom pivots wear quite quickly. A continuous hinge is the most cost-effective and simple repair method for many single door applications and the products are not limited to just shopfront aluminum applications.

Contacting your local locksmith would be your first stop in getting quality professional door repair services, with technicians that can advise the different options.

Strikemaster II To The Rescue - Again

 This week, we were called to another Home Advisor door repair project for a client who experienced door frame failure.

The image to the right here, shows the Strikemaster II product installed to repair the busted door frame. This particular installation required me to check the entire 5' strike plate into the existing frame after removing the weather stripping.

The Strikemaster II used here is NOT the Strikemaster II Pro, which is the updated product. We used the older product because the door, on a house built in the 1960's, was a very tight fit in its opening and the clearance between the door and frame when closed was about 1/16th". The typical gap around the edges of a door within it's frame should be 1/8th". This allows for weathering or frame movement if the house settles.

The second image shows the trim moulding removed. We had some difficulty sourcing replacement moulding because the width of the required moulding was 1-3/4" wide. That size hasnt been produced since at least 1970. All door trim moulding found today is a minimum 2" wide. We managed to source a supplier who could rip a new piece of moulding to enable to install it to the 1-3/4" frame and allow for the trim to neatly fit inside the brick clad wall, without having to damage the existing clad brick.








And the final image shows the new moulding reattached to the frame, ready for painting.

Being that the average door and frame replacement cost in our local region is ~$1100 - $1500 commonly, using a Strikemaster II or the newer Strikemaster II Pro can cut repair costs and time down to less than $300 total.

Door Frame Repair - After Break In, Using Strikemaster II

We just completed another repair project on behalf of a property management company, where the tenant had been the victim of a burglary attempt where the door was kicked in and the frame failed.

We are not painters and advise our clients of such during the estimate phase. We are happy to perform the required repairs quickly and at the residents convenience.

Below you can see the "before" images and understand what we were about to encounter.

 This view is from the Garage side of the door we were to repair.

We advised the property manager that future painters would also be required to repair the walls and gaps around the exterior side of the frame.

Whomever had rehabbed this place, obviously decided to cut corners to save money (a common action of house flippers)

 You can see the damage to the interior trim, the location where the strike for the entrance set and deadbolt has completely been broken out. Also the paint on the inside wall was torn away in the attack.

Here is a better angle of the damaged door frame.


This project type is one of our common project requests. Customers requiring to fix a broken door frame after suffering from door frame failure resulting from a kick-in attack.

When considering to repair or replace the entire door and frame, understanding that the average cost in the local market to supply and install a new door and frame can be ~$1100 - $1500 for a quality professional to install a standard door and frame, it becomes worthwhile to seek alternative solutions that reduce cost while upgrading the security of the location.

Enter the Strikemaster II. This phenomenal security and repair product is expertly designed and manufactured in the USA. A Safe Homes is a company based in the Carolinas that is on the forefront of product development, especially when it comes to safety, security and protection of the doors we all use daily.

This next image shows our completed repair using new trim and the Strikemaster II expertly installed,

Comparing this to the before pictures shows the entire gaping hole left by the door kick-in (where the entrance set latch and deadbolt go), is now completely hidden.

You can still see the area that requires painting, another project for another tradesperson for another time.

 This image shows a different angle of the new trim and the still damaged paintwork.

Professional painter and decorators will first use caulk to seal the gaps between connecting pieces, Some painters will also remove the trim and paint the wall, then re-install the trim, creating more professional looking lines, that can then be caulked after the paint dries

This final image of the completed project shows a better view of the Strikemaster II. the unique patented product uses a 2 part process to create a "laminating" effect. Also the outer steel uses a lip designed to hook around the edge of the door frame. This lip is an integral part of the product design, because it increases the strength of the product when being attacked.

Strikemaster II also uses stainless steel screws about 3" long, that tie the product, through the flimsy thin frame, to the stud behind, effectively anchoring the new product and providing almost impenetrable strength.

Being 5' long and using 8-10 stainless steel screws, combined with the lip and the laminating effect, the product is very strong because a new attempt to kick-in the door will spread the weight applied by the kicking action across a wider surface.


It is unfortunately, all too common that a great many homeowners, property managers, residents and tenants just are not proactive enough to anticipate future events like door frame failure, by installing products like this in advance of an event. Perhaps purchasing new designer shoes is of greater importance than providing security protection for your family and colleagues.

Speaking to your local locksmith can provide you with some great knowledge and experience to effectively mitigate issues and events down the road.

This entire repair project cost about $300.00 and they could maintain their existing door and frame. Compare that to the average door and frame replacement cost, that does not apply similar door frame strengthening to prevent another kick-in attempt and you effectively spent almost a thousand dollars more without increasing security and protecting your family and possessions satisfactorily.

Strikemaster II Pro - Still The Best offering To Repair And Prevent Door Frame Failure (Post Revisited - December 2009)

Back in 2008, we first posted about the fabulous Strikemaster II product. A product designed, manufactured and marketed by a colleague from North Carolina.

We have been continually selling and recommending this product for many years now, because it is one of the few products of it's kind that very inexpensively will repair your door after a door kick in without requiring you to replace the entire door and frame.

Below, find one of our first posts about this product and the original video that was made to explain it's features.

Over they last 10 years, we have installed hundreds of these products to customers who have suffered the heartbreak of door frame failure. I guess our clients love the fact that such a competitive priced American made product is widely available to correctly and professionally repair their door frames, without requiring they to spend significantly more for a new door and frame, that essentially will not protect them from similar attacks in future.



December 3, 2009

Strikemaster II Pro

This video shows exactly how and why the Strikemaster 11 product is essential to securing homes and residences. This particular video is almost 4 years old and the price displayed there is incorrect.

The new Strikemaster 11 Pro product is an improvement to the design of this fantastic product and is available now. Whether you decide to order it direct from the manufacturer or through any of their dealers, the price is identical.

We expect stocks of the newer model in about 3 weeks time.

We previously talked about the Strikemaster 11 in March 2008.

(source...)



A list of our articles about this product and similar offerings can be viewed here.

Has Tapplock Collapsed?

Uh Oh! Tapplock reveals it's weakness!

Tapplock, the darling startup that confused the market with their bluetooth keyless product in 2016, that we wrote about in November 2016 has been found wanting.

Despite the promise and with $320,000.00 in crowdfunding was delayed until September 2017, six months later than anticipated according to a report (see source).

Despite what consumers think they want, the ages old mechanical padlock is the most cost effective and simple solution to security. Virtually maintenance free, there are many grades of security that will enhance and protect your property.

(source...) 

Leading Russian Lock Manufacturer - Mettem Lock Produces Virtually Impregnable Locking Solutions

Mettem-Production LLC are well known as one of the leading lock and security product manufacturers in Russia and the Eastern hemisphere.

Established in 1992, they quickly became an established name in the greater Russian region, for their super-high quality range of unique door locks and electro-mechanical security solutions.



I realize that in many parts of the western hemisphere, some people harbor negative thoughts about Russia and Russian products, with some political regimes choosing to enforce trade sanctions to attempt to harm them financially. We choose to not enter into the political debate herein and prefer that this site continues it's core objective of informing you about products and services we recommend, offer, discuss and like.

Mettem produce leading products in the mortise and rim lock range, electro-mechanical, mechanical, cylinder operated, mortise key operated, combined cylinder and electronic operated, code operated even specific locks tailored for fire-proof doors.

Mettem locks are made using high-quality alloy steel construction that complies with and often exceeds the strict Russian Governmental standards regime. (which arguably exceeds the Underwiters Laboratory regime in America).
Mettem reapply for the Government certification every 2 years to maintain their supremacy in the market. Their products are factory warrantied for two years from date of sale.

• 1 HEAT-TREATED ROD
• 2 PROTECTION FROM DRILLING
• 3 FALSE SLOTS
• 4 SPECIAL LATCH
• 5 ACTUATOR FOR VERTICAL RODS

• 6 REPLACEABLE FRONT PLANK
• 7 SPECIALLY WEAKENED COG
• 8 ARMOUR PLATE
• 9 CORROSION-RESISTANT COATING
• 10 PROTECTIVE BUSHINGS

Mettem locks use a variety of protection methods to augment the quality of their offerings. Some of which we have listed below in their mortise lock product.

You may notice a resemblance to the well known Hooply range of products that we have written about often.



The wide range of products in their offerings indicate their desire and ability to provide second to none options in their local market. You can see the great range of available models in the source below.

We will show a few of their products below, to give you an idea of their fabulous and varying range.

Pictured here is the Mettem Leader product.
You can see that this is an 8 or 10 lever high-security mortise (skeleton type key) product.

Stainless steel bolts with long throws sit inside an all-steel housing that is very very strong, almost to the point of bullet resistant.

One of the bolts is made from extra-hardened steel to prevent saw cut attack.

The Mettem 318 is a combination 3-point locking solution that offers conventional Euro pin tumbler cylinder control, meaning you can use your high-security restricted and patent controlled keyway cylinders, that you use in your commercial master key systems.

The tabs top and bottom (of the casing) connect to rods inside your door frame to enable top and bottom reinforcement.

The Mettem Rim Lock range also varies in models. This particular unit is a rim lock with top and bottom rod connections for 3 point protection and extra security.

This model shows the inside keyhole, which would not comply with many jurisdictions in the western hemisphere where you are required to have a turnbutton for emergency panic escape.
This is also a 10 lever high-security virtually pick proof mortise (skeleton type key) cylinder.

The Mettem ZV EM 01.01 is a unique product that is hardwired (with battery backup). It is a mortise lock with no visible keyhole on the outside, making this unique solution virtually impossible to defeat with conventional lock breaking tools. It operates using remote controls.

The Mettem ZKP is a surface mounted RIM latch that is easily installed and uses a mechanical combination keypad.
1000 possible codes that can be changed easily on the fly.

Users can recerse the latch easily for outward or inward opening desire in the field.

The GSM control unit is a fabulous piece of technology that allows you to operate your lock or locks via a cellphone or PC (landline too).

Completely controllable via sms or pc, a manager can modify, set up new users, remove or block users easily on the fly.

This product operating with one of the high security invisible mortise locks will create extreme security for communal entry doors in apartment complexes and corporate environments where multiple different people require access across different times and locations. they can also be programmed to allow the remote control credentials to operate separate locking units in the same environment, meaning you only need one remote for multiple different locks.


(source...)

Delaware To Update School And Institution Security Hardware Requirements To Overhauled Policy

Classroom Security has been becoming an alarming and increasing issue across North America in recent years, with the increasing numbers of armed intruders causing havoc to junior elementary (sub-primary), elementary (primary), junior high school and senior high school campuses, as well as a number of higher education colleges and universities.

Intruders, often bullied former students or disgruntled staff members, are fast becoming a major thorn to the security of our children while they are at school.

Delaware State House of Representatives, this week is currently debating and voting on a major policy change and update, aimed at increasing significantly, the security hardware and protocols at all the states schools, colleges and universities.

Many schools across the USA, already use quality door lock systems to secure doors, but many of the existing measures have been found wanting in recent times. This has caused much angst by parents and teachers, concerned with offering quality education to our children in safe, secure environments.

There are a great many products across the wider marketplace that already offer significant strength and security, but too few schools are bothering to spend the necessary investments to protect their faculty, staff and pupils.

There are many different brands of lock systems that provide increased strength and design, to better protect our children, including double cylinder lever entrance sets (called Classroom Locksets), including but not limited to Yale, Corbin, Schlage, Arrow, Assa, Abloy and many others.

Essentially, "a double cylinder classroom lockset functions like almost any other lever or knob entry set, except that it uses an internal keyed cylinder to enable the locking of the outside handle, while ensuring the inside handle remains unlocked and still easy to escape through, if required (maintaining life safety and International Building Code policies and rules)."

Some schools and institutions are spending millions of dollars to increase the security of their classrooms and entrances, but often they neglect to ensure that doors and windows include bullet resistant glass or resistant window films. Many seem to believe that the quality lockset and an alarm system will provide enough security to prevent an armed intruder from wreaking havoc through their schools.

Delaware are debating the inclusion of alarm systems, bullet proof accessories and double-keyed locksets.

In our 35+ years of locksmithery across the world, we have installed many locksets to school entrances and classrooms to increase the security of these doors.

In one case many years ago, one school decided to install double cylinder deadbolts to every door, as recommended by their security analyst and architect, before consulting with professional locksmiths, who are deliberately trained in physical hardware that complies with life safety, building codes, insurance requirements to protect would-be users of these rooms.
Our company was asked to install according to the plan and completed the request, against our better judgement, while warning the school officials that their desire was not legal. One week prior to the opening of the new school term, state and local inspectors came in to certify the school for opening, but when they saw the double cylinder locks fitted to all doors, they immediately failed the school because they did not comply with building and life safety codes.
Our company was once again called in to rectify the issues with new "approved" products that met or exceeded the codes, adding significant cost to the project. Our company worked overtime to complete the task prior to the school opening on time.

This reinforces the point that involving your local trained professional locksmith can and will augment your bottom line costs and save you considerable angst and compliance issues down the road.

There are many professional locksmith companies across North America, that provide trained professionals with field experience that are able to provide best-case-scenario advice, that will help any organization to increase their physical and electronic security measures, without breaking the bank.


(source...)

Lockwood 303/355 Jemmy Proof Deadbolt Prevents Door Jamb Spreading - Thwarting One Of The Most Common Non-Destructive Door Bypass Techniques

The Lockwood 303/355 range of surface/rim mounted deadbolt locks offers a unique security product that effectively connects your door and frame together, preventing a common door bypass technique known as frame spreading.

You may have heard or seen an old product that has been around for many years known as the Segal Jimmy Proof Deadbolt.

The product has been loved for over a hundred years by many dwellers for its simplicity and its security.

The Jimmy Proof deadlock uses two pins that drop vertically through a two ringed strike plate, physically attaching the door to the frame/jamb. The lock usually holds to the door with 6 screws, 2 for the outer cylinder and four for the body of the deadlock.

The product pictured here is the Australian Lockwood 303/355 Claw Bolt Rim Deadlock, that uses 2 screws though the inside plate assembly to attach to the external key cylinder and a further 4 screws to attach the plate to the door. It also uses additional side mounted screws to attach the deadlock body to the internal plate.

The strike plate consists of a two part unit, with two hardened metal rings and a cover plate that are attached with 3 long screws anchoring the strike to the jamb. The separation of the two parts on the strike adds a laminating effect which further increases the strength of the application.

We also include an image of the Bilock Extreme Security Rim Cylinder, which can be used externally to provide 100% Bump Proof and virtually Pick Proof external keyed access.

The product is a highly sought after incredibly strong deadlock that increases your security tremendously. Not especially beautiful, but available in Satin Nickel or Mahogany Brown, if you dont mind having a large deadbolt on your door, you can rest assured that the security is second to none, worldwide.

Other manufacturers over the years have produced similar products, like Yale and Abloy. The Abloy SuperStopper version was a Black Steel Super-Hardened Body with Stainless Steel Turn Button and Stainless Steel Strike Plate. It was quite expensive and saw few sales in it's time before being discontinued. I have installed both the Lockwood version and the Abloy version during my career. I have also installed the Yale and the Segal a few times too.

If you use hinge pins to secure the hinge side of your door (which will prevent a would be intruder from pulling your door off by simply removing the hinge pins) and a Lockwood 303/355 Jemmy Proof Rim Deadlock, you can rest assured that your door will continue to be physically attached to the door jamb and will provide significantly increased security for your dwelling

Trident Multi Point Lock Products - Putting Strength Back Into Security

Trident Solutions are a great company who provide surprisingly strong multi-point lock systems for industrial and commercial applications, that are considered at the top of the chain for their security, ease of installation, strength and ambience.

Sensational products that suitably secure your premises are often much better than electronic alarm systems, because unlike alarm systems, physical security products directly prevent destructive entry techniques. Alarm systems make a noise, which is great if you want to be informed, but they do nothing to stop you getting broken into.

I have personally installed 2 of the Trident Solutions and the clients are very happy, even 4 years down the track.

If strength and confidence in your security system is a integral need for you, look no further than Trident to appease you.

(Source...)

Bolt Buddy - Proactive Security Product Made In Canada Prevents Door And Frame Failure

Always Affordable Locksmiths Ltd are a family owned professional locksmith company  in Canada that produce the fabulous Bolt Buddy deadbolt protection product.

The product, as described in the video above, is an effective security protection device that can thwart the most typical method of door break ins - kicking the door down.

We have been touting the strength and usability of the fabulous Strikemaster II Pro Door Frame Protection device for many years now and continue to offer the product as one of the best protection and jamb repair products on the market. American made and from North Carolina, The Strikemaster II Pro is unsurpassed in it strength, design and quality.

While we do find that some customers are proactive enough to install the Strikemaster II Products, most appear to wait until the horse has bolted before doing anything to "fix" their issues. This means that most customers wait until they have been broken into to install quality security protection products.

When you compare the average cost of replacing an entry door and frame in today's market to the sense in using the Bolt Buddy or the Strikemaster II Door Protection products, it really is a no-brainer. Yes, you can purchase a new door and frame at the big box store for $300-$500 and pay a cheapo handyman another $300-$500 to install it, but remember,"if you only want to pay peanuts, expect to get monkeys". The average cost for a professional door installer in my local market to supply and install a new entry door and frame, depending on desired model, is between $1200 - $1500.

The Bolt Buddy is a product designed to offer tentamount security at a fraction of the cost compared to other products. The ease of installation is attractive because a DIY'er or locksmith can easily install them in minutes.

I receive many calls to repair doors after being broken into. Over the last 10 years, I think it is one of my most called for project requests, to repair a kicked in door. I swear by the quality of the Strikemaster II Pro product. I am a user of it myself and it has protected my home from an attempted break in, so I  am very happy to recommend it, from first hand experience.

I am really impressed with the simplicity in the design of this Bolt Buddy product. The small footprint and ease of installation will protect entrance doors for many years. The security protection of your family and your belongings is paramount in maintaining a happy balanced life and using a Bolt Buddy will help to ensure you are protected.

We are not a reseller yet of this product, but hope to be soon. It is not expensive and worth considering if you're proactive about the security of your home and family.

(source...)

Window Security Film - Reduces Casualties In Recent Spate Of Bombings In NYC

We have written about a security product called Shattergard, that we make available to discerning customers, a number of times in the last few years and now we read with interest about windows in NYC that use shatter proof glass and how effective they were in preventing widespread injuries in the recent bomb blasts that rocked the city.

In the article (in the source below - now since removed) the authors hold that since 9/11, New York City "elders" decided that one way to reduce potential injuries while at the same time reducing the smash and grab crimes of opportunity, was to invest in shatterproof glass and/or products like Shattergard.

Shattergard is a product created and sold by Global Security Products out of Atlanta. My friend and colleague Jordan Frankel designs and produces unique security products aimed at minimizing damages caused by criminals that affect our very lives.

Global Security Products produce products like Shattergard, and related products, Ongard Door Brace, Outdoor Security Lighting and Wirelsss CCTV Camera Security Systems


(source...)

Bilock Deadbolt And Strikemaster II Prevent Break In Attempt

Even us locksmiths are sometimes preyed upon by nefarious people.

I arrived home just now, from running a service call, to find this picture of my lockbox smashed open.

Luckily there was no key inside.

I also saw a boot mark on the door, where they might have attempted to kick-in the door. About 3 years ago, I installed one of my Strikemaster II door frame protectors to this door frame and apparently it has performed it's task perfectly.

The Bilock deadbolt prevented picking or bumping and the Strikemaster II prevented the frame from being destroyed.

No losses occurred except for the one elcheapo lockbox.


So.....this is one of the reasons we continue to sing the virtues of the products we sell and recommend.
We choose to practise what we preach. If it's good enough for our select customers, it is also good enough for us too.

We have been designing, constructing and installing Bilock products for over 25 years and across 4  continents. It is one of the best products aimed at maximizing your security, while minimizing potential threats from picking, bumping or even unauthorized key duplication.

We became a distributor for the fabulous Strikemaster II Pro, about 5 years ago and have installed a great number, usually to customers who have already suffered a door frame failure resulting from their door being kicked in. The Strikemaster II Pro is one of the best methods for repairing a failed door frame, without the need to replace your entire door and frame. (Average cost in the greater St Louis region to replace a standard entrance door and frame is about ~$1200.00 - ~$1500.00)

I must say, I am very pleased that these products have lived up to their hype.

Robbers Kick In Door Of St. Louis Home, Shoot Man

A June 19, 2015 article in the St Louis Post Dispatch tells about a homeowner in North St Louis County who was shot by intruders after they kicked down the front door.

Luckily the homeowner survived the brutal attack.

According to the article, the robbers were looking for guns and money.



This story highlights the need for better door protection products, purposely designed to thwart door frame failure.

We have been offering the fabulous Strikemaster II Pro Door Frame protection and repair product for almost 5 years now and have installed a significant number to doors after the door frame has already been damaged. We have sold and installed the product to concerned homeowners who proactively want to protect their homes and families with so far, no reported failures of the product.

We originally talked about the Strikemaster II Pro in this article back in December 2009.

One instance that comes to mind was when a customer called me on Thanksgiving 2010 after her front entrance was broken down by the fire department answering a smoke detector alarm call. She had left some soup on her stove turned down to low, to keep warm while she darted out to the shop. Smoke from the stove got into the smoke detector signalling the fire department who attended very quickly and broke down the door. Because she had a $4000 door, she was quoted by multiple contractors significantly expensive prices to replace her door and frame, however no one was able to come out for a week. She couldnt leave her door unsecure and was put off by the unrealistically expensive estimates. She got on to me through the Home Advisor network and I contacted her immediately, informed her about the Strikemaster II product, sent her to the product video on my website (in the above link), estimated the paltry cost and waited for her return call. She called back 15 minutes later and booked me for the next day. We attended the site, installed the Strikemaster II, which completely repaired her existing frame and covered all the damage, without having to replace her door and frame. Needless to say she was very pleased.

We are currently out of stock of the product, with new supplies expected in the next week.

(source...)

SOPL Expo May 1-3, 2015 - Indianapolis

The Society Of Professional Locksmiths proudly introduce the inaugural SOPL Expo, to be held in Indianapolis Indiana, May 1-3 2015.

Daring to be different, the SOPL is a modern era locksmith association that believes in training as one of the core influences in the future of the locksmith industry.

The increasing technical challenges and shifts in business accumen, affect all our decisions regarding the locksmith business. 

Now, the opportunity to participate in a new breed of association, presents us with the challenge to learn about new and alternative products, learn new business practises, marketing skills and business opportunities..

Some of the classes on offer include...

Internet SEO & The Scammer Killer Kit

Stop With The Deadbolts Already!

Emerging Access Control & Integration

Wireless Automation Controls

Commercial Door Installation, Service and Exit Hardware

Servicing Meroni Decorative Hardware

Door Jamb Mortising for Reinforcement

Advanced Master Keying

Advanced Automotive Transponder Programming

Safe Manipulation Boot Camp

Whereas the courses will be open to bonafide locksmiths, the exhibits and trade show will be open to the public.

Interact with locksmiths, teachers, industry players, facilities managers and more.

Check out all the details in the source below.

(source...)

Lockwood 002 L Rim Mounted Deadlatch With Lever Handle

This is the Lockwood 002 L deadlatch. It is a very sought for product by users demanding top quality physical security protection on entry doors. It is especially common for commercial doors like fire escapes because it is held to the door with 4-6 steel screws and the strike plate is also very secure. Options include steel frame strike plates, open in strike plates, open out strike plates, mechanical digital entry interfaces, medium/high security key cylinders.

The product is available in satin nickel, polished brass, brown and polished chrome.

Satin Nickel is the most commonly purchased color finish. the large lever handle makes use by physically challenged people significantly easier and complies with all life safety/building codes for egress.

Simple/straightforward to install, this version of the perennially popular Lockwood Rim Deadlock range continues to lead the world in high quality mechanical and physical protection products.

Priced at the upper end of similar competing brands, the Lockwood 002L is not cheap because it is constructed from high-grade aluminum, steel and hardened steel properties.

We currently have a few units available for purchase.

We are installing these to rear access doors for shopkeepers intent on beefing up the security and ease of use of their rear entry/exit.

Contact us for your demonstration.

The Fabulous Hooply Manufacturing Facility In China

The Fabulous Hooply Manufacting facilities located in China, uses state of the art technology and practices to create their sensational line of high-security lock products and door hardware.
As shown in the video, the product line is exceptionally well made and offers one of the widest varieties of style and security available in todays market.

We are pleased to become known as a representative of this sensational product line in the USA.

Unlike other stateside companies, who choose to offshore their manufacturing in attempt to save costs, Hooply have always designed and built their products in China, but tailored them for the worlds market.

We have mentioned some of their products already in this blog and intend to write more individual articles about different pieces in their range. Stay tuned!

(source...)

Hooply Locks Continue To Impress

We continue to see increased interest in the fabulous Hooply range of door handles and locking systems.

Hooply are a specialty manufacturer of very strong mechanical locking systems, Their product line has been snapped up by many builders and homeowners especially in severe weather affected locations.

Many homeowners in the Florida and gulf states regions especially like the wide range of handle designs that compliment their style of hurricane and wind resistant doors and frames.

We have recently sold more products to customers on both sides of the Florida coast, to repair/replace parts.

The competitive cost of Hooply products, combined with the extremely strong all steel internal mechanisms, makes the product line an extremely attractive alternative to more mainstream brands.

Pictured here is the Hooply 5510 handle set. There are numerous styles and color choices available and we will be bringing these to light here in the near future. Stay Tuned!

(source...)

Armored Nut Shells - Personal Protection Armor For Professional Athletes And Military/Police Personnel

Military and Law Enforcement providers as well as professional athletes, especially UFC (Ultimate Fight Club) participants, are raving about this exceptionally designed and produced Missouri made product.

Armorednutshellz.com is the brainchild of talented engineer and former marine, Jeremiah Raber.

Exposure to car racing engineers, enabled Raber to discover the benefits of the well known bullet resistant product called Kevlar.

Not being altogether thrilled with just another Kevlar product, Raber spent countless hours researching and testing other fabrics and fibers, before settling on a superb combination including Kevlar and Ultra-High-Molecular-Weight Polyethylene (UHMWPE).

The product he designed has proven to be one of the finest armored protection devices available today. Sportspeople, including soccer players, cricketers, hockey players, baseball players, even professional American footballers and participants in MMA (mixed martial arts) are seeing the benefits of this expertly designed and produced armored protection product that protects the groin region from damage.

Raber produces the product himself in a especially designed workshop using the finest materials.

Personal and physical security products are what this site aims to bring attention to. This is an example of a personal security product that not only can save your balls, but potentially save your life too and hence deserves placement in this blog.

Check out Armored Nut Shellz in the source below.

(source...)

Skydas - Unparalleled Burglary Resistant Entrances

Skydas are a Lithuanian company that specialize in super strong virtually impregnable entry systems.

Especially designed and built using state of the art manufacturing facilities located in Vilnius, Lithuania, Skydas began in 1999 with just 5 employees.

In the video (after the jump) below, they show attempts to bust open a door and just how strong this product is.


Specifically a high security door manufacturing company, they now have over 100 employees and sales offices in over 20 European countries. As the video shows, the doors and entrances are built to withstand some of the toughest and most determined destructive entry methods.

Skydas also produce some incredibly aesthetically pleasing doors and entrance-ways. But they do not just limit themselves to doors. They also include smash/bullet resistant glass as well.

Pocket Door Locks With Key Continues to Impress The Market

 

TThe Lockwood 7444 Keyed Pocket Door LockThis impressive product continues to lead sales in our small company. The obvious reason for leading the market in this product category is it's modern, inexpensive, yet super-high quality design and construction. Installation is super easy, as depicted in the video below.
This sought after product is being snapped up by leading hotel chains and office constructors, keen on separating 2 rooms securely while having the advantage of connectivity without requiring two separate doors and frames.

The Cowdroy P697 Double Cylinder Keyed Pocket Door Lock
is slowly being phased out of our inventory, yet it is still available in satin chrome and polished brass.This product is especially designed to replace the more common square pocket door privacy sets found most common across the market
(source...)