Meroni Pigio 1 Installed To High Traffic Doors In An Upmarket Car Dealership

A couple of weeks ago, we completed an installation of some Meroni Pigio 1 Passage Sets to high traffic doors in a car dealership

Before

After Installation - external

  Here is an image of the issue we faced. The existing mortise lock handle hardware kept falling off due to overuse.

After Installation - internal

After Installation - edge

Before Installation - internal

Before Installation - external

After Installation - external

The install was painless and straightforward. We used Don-Jo renovator kits to modify the edge fittings.

We also installed Rockwood Push Plates to cover the existing holes left by the old hardware.

These Push-Pull handles are made from high-quality materials and require very little effort to operate. They look good and are easily used by management and also mechanics in the workshop who can often be a little heavy handed with handles they use. (you can see the make-shift tape they had put into use because of the problem they were facing)

Now, they dont even need to use a dirty hand to operate these handles. they can pull the doors open with their arm easily and push them open from inside, even when their arms are full of parts from the supply shop.

Here is a little video that shows how the product looks and operates...

Lockwood 7444 Keyed Pocket Door Lock - New Inventory Just Arrived And Available For Purchase Now

UPDATE: Our fabulous and in-demand product, the Lockwood 7444 Keyed Pocket Door Lock is now back in stock, with new inventory having just arrived.

We just updated the purchase page and thank our  customers for their patience.

The new model, tailored to suit thicker doors of 1-3/4" (45mm) has not been released yet, although we are informed that they will be available about August. We expect to have new supply of this new model shortly thereafter.

The quantity of inquiries we are continuing to receive for the in-stock Lockwood 7444 continues to surprise us. The recent inquiries for the new 1-3/4" door model is exceeding our expectations.

Many customers across North America have 1-3/4" thick doors and some have purchased the 1-3/8" version, thinking they could just adapt it to suit the thicker doors. They can, although installation requires a little modification to your door for perfect fitting.

Until the newer model is released, we suggest purchasers who wish to install to the thicker doors, countersink the crossbore holes about 3/16" from each side. This will enable the lock body to seat correctly in your door and make connecting the screws simpler, with the activation mechanism correctly activating the bolt mechanism.

To purchase, simply click on the product image at the top left of this page and be directed to our sister site with purchase and shipping options.

Thanks again for the continued interest and your patience.

Bilock Exclusive - New Updated Bilock High Security, Bump Proof And Virtually Pick Proof Key System.

These are the color ranges of the new Bilock Exclusive key system. We previously mentioned that Bilock would be releasing their new product that offers increased patent protection right through to 2035, in a December article.

The new product dramatically increases the security of the system, while doing away with the trigger system in the New Generation system.

The New Generation system used a single side-bar blocking pin and 13th pin to increase the pick resistance of their previous offering. The patented Quick Change core removal system has been completely overhauled and is now way more effective than the previous iteration.

There is a video in the source below that explains all about this new and improved system.

Essentially, Bilock have replaced the trigger system with a more effective double-action trigger system that does not require a separate trigger. The new system uses specifically coded side pins that engage the side-bar in a unique fashion and directly increases the pick protection.

Previously, any key could have been converted into a core removal key. The new style makes a purposely designed control key to remove and replace cores.

Master keying is still available with up to 17 million potential key changes in a system.

The older New Generation system is still available for purchase and still being produced and we continue to build these systems for our discerning customers.

The other updated component of Bilock Exclusive is the addition of MiFare chips that can be embedded into the key-heads to operate effortlessly with many modern electronic access control and alarm systems.

For an in-depth explanation of the new Bilock Exclusive product, click on the source below and watch the video at the bottom.

(source...) 

Breaking News - Lockwood To Release Keyed Pocket Door Lock To Suit 1-3/4" Doors

Breaking News!! Lockwood Australia, the Assa-Abloy manufacturer of the leading door hardware products in the southern hemisphere will release this coming July, 2016, another adaption of their fabulous Keyed Pocket Door Lock.

The Lockwood 7444 Keyed Pocket Door Lock (pictured above) has been on the market about 5 years now and our sales have continued to be stellar in the wider North American market.

Many discerning customers, across the Americas have realized that once in a while a product surfaces that changes the world. Remember Apple's iPhone? or Google's Android OS? Many modern manufacturers capitalized on the Google owned operating system releasing competing smart-phone products in the mobile/cellular phone arena.

We started selling the fabulous Lockwood 7444 Keyed Pocket Door Lock a little over 5 years ago and have enjoyed stellar sales, thank you.

As shown in the video on our sister site, the ease of installation of this superbly designed product, answers the needs of many customers hoping to secure their cavity/pocket doors.

We have happily sold many hundreds of this product over the last 5 years and so far, luckily, we are yet to receive any negative reviews. Yes, we have honored the warranty twice for people who have chosen to return the product for a refund. We have once had to provide an extra strike plate because of an installation error. We have done so, because we believe in our product offerings and feel our reputation for quality is proven by the products and services we provide.

Lockwood made me aware recently of their intention to finally release an identical version of the Lockwood 7444 Keyed Pocket Door Lock but for 45mm/1-3/4" thick doors, answering the call from a great many inquiries to that effect.

They anticipate a late July, 2016 release and we are hoping to have inventory around September or October 2016.

Stay tuned for updates. We will release additional news as soon as it comes to hand.