Ebola Scare - Preventing The Spread Of This And Other Contagious Diseases.

Pictured here is an electron microscope view of the Ebola Virus.

The disease has been surfacing and spreading across Northern Africa for the past couple of years and has started to make it's way to Europe and America with cases being reported in Spain, Greece and Dallas Texas.

A few years ago, the nasty Avian Flu from Asia commonly referred to as H1N1 was the planets last massive virus to affect numerous victims across the world, that got the attention of the media and Centers for Disease Control.

There are many media sources that have been reporting on methods to minimize the spread of this fatal virus, but so far the only cure is said to be a product called Zmapp, a drug developed in the USA to combat the disease.

Serrature Meroni, the Italian manufacturer of leading nouveau door handles and entry products introduced their Anti-Bacterial range of door knobs, about 7 years ago. The product uses an especially formed handle that dissipates or bounces microbes and bacteria away from the door handle, preventing transferrence of these "nasties" between people who naturally would touch the entry door handle to enter or exit a dwelling.

Prevention is often said to be better than cure, because it mitigates the spread of a disease before it can affect large populations.



The Serrature Meroni Combina is the logical choice for any public amenity, hospital, medical office, clean room, laboratory or even educational facility, that might decide that the protection of their staff and guests is of vital importance to their business.

The handles are available in limited colors (which has something to do with the Anti-Bacterial properties) and enables all users, even the physically challenged, to easily operate the door handles, free from worry of contracting or spreading diseases.

UFO+ The Ultra Secure And Stylish Meroni Lock For Light Commercial Vans - Samples Arrived

Serrature Meroni released their fabulous UFO+ Automotive Van and Truck lock system last year. Overwhelming demand across Europe has seen the product become a much sought for solution for securing both sliding and swinging doors on vehicles like the Mercedes Benz Sprinter, Ford Econovan, Ford Transit Connect, Citroen Berlingo and similar ranges of vans and trucks.

The upmarket product is made from stainless and other hardened steel components. It uses a state of the art high-security locking system (similar to Kaba Gemini).

The keyhole uses a hardened steel front disc (keyway) that spins free, making the product extremely drill resistant.

The product is a little difficult to install unless completed by an especially trained technician, but it offers the convenience of interior unlocking, unlike the multitude of other competing products of the same genre.

See the install video after the jump.

We first wrote about this new product in January 2014

We had anticipated a summer release date for this product in the USA, but unfathomable demand from Europe, from UPS and FEDEX fleet managers, saw the USA release pushed back until now.

We have 3 pairs for immediate sale. we will be displaying the product to Mercedes dealers in the Midwest first and anticipate a "buy now" option soon.

New Inventory - Lockwood 7444 Keyed Pocket Door Lock

Our fabulous Lockwood 7444 Keyed Pocket Door Lock is now back in stock. we have 120 units of the product in the Satin Pearl finish (Satin Nickel) and 4 units left in the Chrome Plate finish.

The manufacturer recently increased the cost of this product, but at this time we will not be increasing the retail price.

We are also stocking limited quantities of the Lockwood 7400 Privacy (bathroom) Pocket Door Lock, the Lockwood 7410 Latching Passage Pocket Door Lock, and the Lockwood 7450 Passage Pocket Door Lock. The non keyed variety are only available in the Satin Pearl (Satin Nickel) finish at this time. We will soon be creating an individual buy now button for these additional products.

The keyed version is still only $120.00 plus shipping and handling.

Smartphones To Open Doors For World's Biggest Lock Company As It Eyes Deal With Telcos

Assa Abloy is the world's largest lock manufacturing company.

Last year alone it made more than $300 million, across multiple different manufacturers.

There has been a continual, albeit modest push to introduce more and more electronic smartphone enabled lock systems across their diverse range of products. 

technology companies like Samsung, Apple and Google have been at the forefront of research and development of all things smartphone, ever since Google beat Apple to market with the first Android mobile operating system.

Many startups have entered the market, touting their own novel products aimed at the residential home security market.

Products like Lockitron, August Lock, Yale Real Living and Schlage or Kwikset Z wave, to name but a few.

The automobile industry has long used the transponder chip technology to better secure our cars and trucks, but the residential entry door market has lagged behind this disruptive technology, only due to the issue relating to electricity.

You see, the reason electronic technologies work on vehicles is because vehicles already use batteries to start, run and power vehicle systems.

Most doors in a dwelling are free standing and most often NOT connected to a power source. This has lead to a surge in the number of battery powered products, like the brands listed above, entering the market. The primary drawback with these products, is the need to constantly be replacing batteries on the units to maintain operability.

There are many dwellings that use electric strikes and hardwired electric lock systems, but that technology, even though it has been around for over 100 years, is expensive to install and consequently maintain.

The market is heating up and demanding better electronic technology for use in our homes, but there has been little productive solutions to the issue of the lack of power.

Whereas the market will continue to develop and no doubt grow, I just cannot conceivably fathom the perfect or best solution to this power predicament. When the power dilemma finally gets solved, perhaps electronic and smartphone technologies will provide a benefit to us home owners who dont want to spend the required arm and leg to hard wire our doors, when a totally mechanical, environmentally friendly, green mechanical key operated hardware solution continues to provide ultimate comparative security and convenience for our homes.

(source...)

Our Keyed Pocket Door Lock has Sold Out Again Due To Unbelievable Demand

The very popular Lockwood 7444 Keyed Pocket Door Lock continues to beat our sales expectations.

We cannot keep inventory of this fabulous in-demand product for very long.

We are almost completely sold out of current inventory and not expecting replenishing supplies until the end of September.

To those customers wishing for the Satin Nickel color, we appologise for the delay and expect to have new inventory before the end of the month. We still have 5 remaining in the Chrome Plate color.

The modification kit for use in 1-3/4" doors is coming along but not ready for sale at this time.

Thank you to the multitudes of customers for ordering the Keyed Pocket Door Lock. It is with your continued interest that we continue to source unique security products.

3D Printed Bump Key Made To Bump Open Locks

3D printing is all the rage in this age of rapidly advancing technology. So much so, that home made items are showing up quite regularly nowadays. The above video shows a European person bumping open a typical cylinder found in many residential and commercial settings in Europe. But significantly, he uses a bump key made on a 3D printer.

This is especially worrying, I suggest because the bump key furore was hyped significantly through the media in the last few years. There are hundreds of videos online across the web, showing kids and adults of all ages making and bumping many brands of locks including some brands that were once though to be pick resistant/high security.

The market can rest easy, knowing that our Bilock Extreme Security cylinders are well known worldwide as the original 100% bump proof and virtually pick proof lock and key pin tumbler system.

Anyone can purchase a 3D printer today, since models are made that are more easily affordable than the industrial printers that surfaced 10 years ago.

For further information on our Bilock Extreme Security products, contact us for your demonstration.

(source...)

Keyring Flashlight Still Works Fine After 18 Months

I bumped into a friend the other day who has my flashlight keyring attached to his keys. The strength and longevity of my "business card" continues to provide light to the user and advertising for me.

You can see he ground the edges of the housing away, yet the light still works perfectly.

Thanks Pauly!

Meroni Nova Locks Used to Replace Peachtree Multi-Point Patio Door Mechanism

 On last Monday, we installed new Meroni Nova locks for a customer who was unable to replace his Peachtree Multi-Point lock system on his patio doors.

The installation process took about 5 hours to complete and involved removing the old Peachtree mechanism that was built into the body of the door.

We supplied Rockwell push plates to cover the large holes left by the old mechanism and installed the new locks to the plates.

The first picture is the completed look.

 To enhance the ambience of the install, we installed a dummy set to the fixed leaf and used the customer sourced strike plates to improve the look.

This second picture shows the dummy installed.

 The customer was able to source replacement plates for his old Peachtree Lock, which we used to cover the holes left by the old mechanism. We installed the Meroni Nova within the replacement faceplate.

 The completed look from inside shows the Rockwell push plates covering the old holes, with the Meroni locks fitted symmetrical.

 The locking knob installed to the operating leaf.

Installing the Meroni mechanism on the operating leaf. All care is taken to ensure precision installation. proper installation is vital to enhancing the required ambience of the fitting.

Finishing work is important. You can see the size of the holes we were required to cover on the fixed leaf (under the drill).

The final result, enabled a simple to operate lock mechanism that suits the color scheme of the interior design of the room.

This is the second Peachtree Multi-Point lock system we have replaced with the fabulous Meroni Nova hardware.