Extra-Strong Security Blocker Plate And Concealed Continuous Hinge Installed To Very High Traffic Shopfront Door

 Very early today, we installed a custom built mild steel security blocker plate and concealed fix continuous hinge to a very high-traffic convenience store, to upgrade and improve the operation of the relatively newly installed aluminum shopfront door.

Our loyal returning customer, who has used us consistently for the last 5 years, a user of our Extreme Security Bilock Restricted Key Control System for multiple properties, owns this convenience store on a busy main arterial road in the North County of St Louis.

The area is experiencing a gradual rebirth, especially since the recent issues with nearby Ferguson Missouri, a site that was in the national and international news a few years ago due to the unfortunate shooting of an unarmed African-American teenager by a police officer.

The incident sparked riots and protests unseen in the St Louis region for a great many years.

We were required to custom design and install mild steel blocker plates with sex bolts. There was a 3/16" clearance difference between the operating door and the fixed leaf
door. We had to remove the existing security bars, cut them down in length to enable the concealed continuous hinge to fit correctly (not pictured).

 Installing the custom designed mild steel long blocker plates, required a 3" wide x 1/8" thick inside plate, combined with another 4" wide x 1/8" thick outside plate to be installed to the external of the operating door, so that the plate would conceal access to the latch mechanism and cover the fixed leaf edge (which was sitting 3/16" out from the operating leaf when closed)

Installing sex bolts (also known as concealed bolts) is the obvious solution to providing top security for externally mounted product because they prevent would be burglars from using conventional tools to remove the bolts.

Drilling through 2 separate mild steel plates, that were deliberately separate and not conjoined, providing a minimal gap between the plates increases the security application due to the laminating effect.

Laminating is a term used when there is a slight separation between panels. The effect of laminating, naturally increase the strength of the product (depending on the laminate material).

You can see the inside screw under the internal security bar in this image. We installed a number of these sex bolts to the application to increase the security across multiple points, providing significantly greater strength to the application.

The customer, had new doors installed only 2 months previously by a shop fitting company. Unfortunately the installer decided to use only 2 regular butt hinges on this extremely high-trafficked door. The door is operated between 10,000 and 20,000 times daily.

The extreme use and operation of these doors by customers, meant that the 2 4" butt hinges were not up to the job requirement for continued longevity and efficient operation. In 2 months, the door was already beginning to sag, to the point where the owner required to pay an employee overtime to maintain a continued presence on site, because the doors would not secure correctly.



We have not provided an external image of the concealed continuous hinge, but it is fitted with more sex bolts securing it permanently in place.

The concealed continuous hinge is manufactured by Select Hinges, a company that produces there products in America and are designed to last 50 years and that is their warranty period too.

With correct installation these doors will not sag, due to the number of fastener points, increasing the strength of the fitting.

We have installed a significant number of continuous hinges in recent years, mostly to shopfront doors due to the standard pivots wearing quite quickly and customers having many issues relating to sagging doors, inability to secure properly and causing angst for staff.

We were required to modify the security bars on this door to enable the continuous hinge to install correctly.

The entire project was required to be completed before the late Sunday opening time, because it is the only day of the week, where traffic is quietest before 9 am. We arrived at 6 am and began the project at 6.30am. Total completion in 5 hours. Certainly a mean feat in extreme heat conditions (but before the main heat of the day).

We will return at another time to upgrade the door locks at this property to the customers Bilock Extreme Security Restricted Key Control system. Then they will enjoy 100% bump proof and virtually pick proof lock cylinders with virtually impossible to duplicate color coded restricted keys, that will increase the security while protecting the owner from would be surreptitious attempts to copy keys.

Bolt Buddy - Proactive Security Product Made In Canada Prevents Door And Frame Failure

Always Affordable Locksmiths Ltd are a family owned professional locksmith company  in Canada that produce the fabulous Bolt Buddy deadbolt protection product.

The product, as described in the video above, is an effective security protection device that can thwart the most typical method of door break ins - kicking the door down.

We have been touting the strength and usability of the fabulous Strikemaster II Pro Door Frame Protection device for many years now and continue to offer the product as one of the best protection and jamb repair products on the market. American made and from North Carolina, The Strikemaster II Pro is unsurpassed in it strength, design and quality.

While we do find that some customers are proactive enough to install the Strikemaster II Products, most appear to wait until the horse has bolted before doing anything to "fix" their issues. This means that most customers wait until they have been broken into to install quality security protection products.

When you compare the average cost of replacing an entry door and frame in today's market to the sense in using the Bolt Buddy or the Strikemaster II Door Protection products, it really is a no-brainer. Yes, you can purchase a new door and frame at the big box store for $300-$500 and pay a cheapo handyman another $300-$500 to install it, but remember,"if you only want to pay peanuts, expect to get monkeys". The average cost for a professional door installer in my local market to supply and install a new entry door and frame, depending on desired model, is between $1200 - $1500.

The Bolt Buddy is a product designed to offer tentamount security at a fraction of the cost compared to other products. The ease of installation is attractive because a DIY'er or locksmith can easily install them in minutes.

I receive many calls to repair doors after being broken into. Over the last 10 years, I think it is one of my most called for project requests, to repair a kicked in door. I swear by the quality of the Strikemaster II Pro product. I am a user of it myself and it has protected my home from an attempted break in, so I  am very happy to recommend it, from first hand experience.

I am really impressed with the simplicity in the design of this Bolt Buddy product. The small footprint and ease of installation will protect entrance doors for many years. The security protection of your family and your belongings is paramount in maintaining a happy balanced life and using a Bolt Buddy will help to ensure you are protected.

We are not a reseller yet of this product, but hope to be soon. It is not expensive and worth considering if you're proactive about the security of your home and family.

(source...)

Steel Desk With Non-Removeable Drawers - No Match For An Experienced Locksmith Using Meroni Cabinet Furniture Locks

 One of our regular customers, an ongoing account customer that has been using us for about 10 years now recently contracted us to devise a system for securing a metal desk in a very busy upmarket car dealership.

The application was a steel built desk with non-removeable drawers.
There is a lockable tray directly under the midst of the desktop they had also lost the keys for, but the lock didnt secure the drawers too.

They wanted a system that allowed them to lock the side drawers.

Because of the weight and construction of this type of steel desk, conventional cabinet lock products would not easily install to the application.

 You can see that the drawers fit into relatively thin metal walls, that are strong but thin. The issue was being able to secure the new locks but not having enough material to install with metal thread self-tapping screws. We couldnt remove the drawers to access the internals of the desk drawers so that made using nuts and bolts impractical either.

The drawers, when open would pull out somewhat, but not enough to completely withdraw the drawer to enable easier access to the insides.

We would have been required to flip this heavy desk over to be able to work on the project, meaning the customer would have had to remove everything from the desk and all it's contents in advance of completing the project - a task not heavily favored.

 You can see the insides of the drawer and desk body where the position/location of a lock would have been difficult to install.

With thin but strong steel walls, we determined that using a push lock with an extension threaded bolt, we could rivet the lock body to the outside of the desk, in such a position to miss the drawer walls and channels.

But due to the distance between the back of the bolt and the actual drawer itself when locked, the bolt was not long enough for many other brands to accommodate.

You can see here that by using the Meroni 2224 Push Lock with Brass Cylinder Body, with a threaded hole at the back of the bolt, we were able to extend the length of the bolt sufficiently using a stainless steel screw. This enabled us to have a conventional cabinet lock that could be mounted externally and have enough distance to secure into the body of the drawer wall itself.

Installation to the outer body of the steel cabinet, under the desk makes an almost hidden locking feature to secure each individual drawer separately.

We simply drilled the appropriately sized hole in the steel body and secured the cabinet lock with rivets.

The benefit of riveting instead of using screws or nuts and bolts in this situation, is that the lock is mounted permanently and there is less likelihood of fasteners coming loose over time.

This means that little to no service will ever be required in future.

Handshake Free Zones - A New Idea To Mitigate The Spread Of Potentially Harmful Germs

Mark Sklansky, a pediatric cardiologist and self-described germaphobe, tested a new method for limiting the spread of germs in 2 UCLA neonatal intensive care units.

He describes the method as a "handshake free zone".

According to an article that appears on NPR, the doctor tried these "handshake free zones" in an attempt to minimize the spread of germs often transferred in hospital (clean) environments.

The article talks about how harmful bacteria are too easily spread in hospital environments, suggesting that patients dont come to hospital to get sick, rather to find treatment for illnesses.

EDIT: Another article has appeared on ABC News  today that expands upon the NPR article. I found this quote particularly interesting...

"WHO estimates of compliance for hand hygiene in medical settings frequently fall below 40 percent, Sklansky said. Poor hand hygiene can mean increased risk for hospital-acquired infections, which kill approximately 80,000 patients in the U.S. each year, according to the WHO." 

We have talked about the fabulous Meroni Anti-Bacterial door handles on a few recent occasions and have received a number of diligent inquiries about these products.

The Meroni Anti-Bacterial handles are especially designed using a special polymer designed by Meroni to lessen the spread of pathogen micro-organisms, thereby mitigating the spread of germs through contact.

Meroni Pigio Anti-Bacterial

The Pigio Anti-Bacterial handle offers not only a method to mitigate the spread of germs, but is the first handle of it's kind to be awarded  CE EN179 certification by European Door and Hardware Federation, in compliance with building codes for emergency exits. A truly "hands-free" mechanical door lock that you can open with your hip or your elbow.

By offering the anti-bacterial components too, Meroni make available high quality, simple to operate door handles that will match almost any decor or ambience in use by many hospitals, clinics and medical or laboratory facilities.

Meroni Combina Anti-Bacterial

The Combina Anti-Bacterial handle offers a typical door knob type model, that can fit in replacement of many other brands with little to no door modifications. Also available in conventional coatings, the broad color range of the Combina product line make it another product that will fit in with modern decor and ambience, desired by many interior designers, architects and floor managers.

Meroni products are exclusively brought to you by Master Key Systems America LLC

Lockwood Paradigm Series Lengthy Entry Hardware - Stylish, Classy, Secure

 Recently, we returned from our factory tour and meetings with a few world-leading lock and door hardware manufacturers.

During our trip, we experienced the manufacturing procedures for many of  Assa-Abloy Lockwood Australia's super-high quality products.

One new product we are currently evaluating for North American market entry is the new Lockwood Paradigm Pull Handle Lockset or Deadbolt.

 The product, (pictured here) is a totally new design that originated in the research and development department in Australia. With a lengthy handle and built-in key cylinder, this new product design, exceeds many requested features by commercial and residential builders, designers and dwellers. Ease of operation with a conventional mechanical bump resistant and pick resistant key cylinder, options include double cylinder, single cylinder, safety release, locking/unlocking indicators, deadlatch, passage latch or deadbolt functions and are available in a host of desirable color finish options.

 Stylish hardware is the modern choice by many new homeowners who want to maintain a minimalist yet sexy ambience without detracting from the features of their doors. This new series of Assa-Abloy Lockwood Australia Paradigm Series combines security excellence with noveau and modern lines that enhance virtually any entrance.

 As you can see, the handles are unique in their design, with a slightly longer external handle that hold the outside key cylinder and a shorter interior handle with a separate thumbturn handle beneath. Using a version of the award winning design Lockwood 001 inner handle makes the product easily operated by physically challenged users.

Of course there are a few different designs to whet your appetite, from plate mounted to straight door mounted hardware.

Double cylinder with safety indicator or no interior cylinder. Safety holdback feature with indicator, so anyone approaching the door from inside can easily view the operational status from farther away.


With replaceable cylinders that can allow for higher security mechanical key systems to also operate, these modern breed of door hardware and entry products are providing modern increased options for residents, businesses and operators to benefit from intuitively easy to use hardware that increases the value of your entry and the value your visitors place on you.


We are putting the product through our internal tests and hope to make this product available in North America shortly.

(source...)

Price Gouging - Is This The Norm For Auto-Dealerships?

A March 2017 article in New Zealand's Business Day website shows the displeasure many consumers face today, especially regarding the super-high cost for car keys, compared to years gone by.

The article (in the source below) tells the story of a consumer who decided to sue their dealer and Toyota New Zealand after the said dealer charged him NZD$525 for the remote plus an additional NZD$50 to program said remote.
The outrageous cost for OEM parts ticked off the consumer enough to file suit and the New Zealand consumer agency The Dispute Tribunal agreed.

The tribunal found Toyota guilty of price gouging.

Similarly, in other parts of the world, car dealers in some towns charge exhorbitant prices to provide their customers with duplicate keys and new remotes also,

Interestingly, the cost to produce the internal components is staggeringly miniscule and many auto dealerships and some after market dealers are continuing to take advantage of the consumer by massively inflating prices.

Auto locksmiths around America and other parts of the world, provide key origination and duplication services for many consumers at significantly competitive costs when compared to dealerships. Many of these auto-locksmiths have spent many years honing their skills and purchasing the unique equipment to enable fast duplication, creation and programming of modern electronic keys and fobs.

Specialist tools that are the cornerstones of the auto-locksmith industry, make significant light work in picking and decoding automobile locks but they do have a learning curve. There are a number of different brands who manufacture all sorts of differing programming equipment because "one size does not fit all". Many professional auto locksmiths have their own preferences and some may be better than others (machinery) for wide range of vehicles offered.

In recent years, the locksmith industry around the world has been infected by growing numbers of fraudulent operators, posing as professional locksmiths. Typically these sheisters will offer a very cheap estimate over the phone or online and dramatically increase the price when they arrive on site (often after completion of their task). Most of these fraudsters are untrained butchers who have never deliberately learned how to use the tools correctly and quite often cause more issues than they fix.
Another issue recently found with locksmith fraudsters is that some of them are making duplicates of their customers keys, leading to an increase in theft of vehicles. Insurance companies were originally responsible for the automobile industry requiring security systems and chip keys, in an effort to reduce the growing quantity of vehicle theft. The effort certainly had it's desired effect, reducing the insurance companies payout costs by many millions of dollars. Unfortunately, the original savings envisioned soon turned to those same insurance companies hiking the costs of auto insurances.

(source...)

Our Directory Of Locksmiths From Around The World Is Slowly Taking Shape... A Locksmith In...

We developed a directory for locksmiths, a while back and are pleased to see some excellent page-rank results in search engines across the world.

New enrollments continue to trickle in to our directory with a difference.

We include links to our colleagues sites too.

New features are on the drawing board too.
Plans are underway to include a blog roll and a featured page of the month.

The latest sites to enroll are featured on the navigation menu at the top.

All sites featured within include 1 page free, with copy designed in-house at our discretion.

Check out http://www.alocksmithin.com/

Internet-Connected Garage Door Operator Disabled In Retaliation For Bad Review

The Internet-Of-Things (IOT) is the new age for many consumers today. The increasing desire for "connected" technological products, raises privacy and security concerns especially when a disgruntled customer leaves a stinging negative review about their purchase.

As is the case with a particular customer who had purchased Garadjet - An Internet-Connected Garage Door Opener, designed to let you see the status of your door and control it via an app.

The customer installed the product he purchased on Amazon and  left a nasty support message on the company's support forum and then one minute later posted a nasty review on Amazon.

That prompted the Garadjet management to retaliate by denying the ID Unit server connection.

All being played out online, the exchange went viral through a twitterfeed that attracts a wide following among the #hacking community. Check out the commotion in the source below