Walmart To Offer Free In House Delivery Including Stocking Your Fridge

A new service by Walmart, introduced this week is set to compete with Amazon for home deliveries of products ordered. Except that Walmart will have their couriers unlock your door, enter your kitchen, open your fridge and stock your purchased groceries on your behalf.

All you have to do is install a wifi operated lock to your entry door, give permission to Walmart employees to enter your home and to stock your fridge.


That all sounds wonderful, doesnt it?

Amazon introduced a similar service last year after successfully merging their acquisition of Ring and Bleep into their company, We wrote a few articles about Amazon Key and related services here.

Are you owner or resident,willing to allow people you dont know, permission to enter your home when youre not there, have access to your kitchen and pretty much the run of your house?

Are you prepared to pay the increased insurance premiums that will no doubt be incurred?

Even if these companies compel their employees to wear body cameras, so you can view them as they enter your private home, are you really going to open yourself to the privacy concerns?

Modern technologies are great in idea and sometimes in practise. But some ideas are just plain silly.
As a locksmith security specialist, experienced technician and appraiser, I continue to explain to my customers the pitfalls of some modern electronic battery operated security products. Many will agree with me once they understand the potential security and privacy concerns.

I often discuss with clients about their current push button battery operated deadbolt they may have fitted. In many of these discussions, the client points out that, after the third or fourth time replacing the batteries, they will go back to using the mechanical key. The most common reason, is they did not expect the regular and repeated need to replace batteries, adding significantly to their cost of their chosen product. Combine this with they being locked out of their residence when they least expect it and still requiring to call a locksmith to pick their lock open due to not carrying their key.

Electronics do indeed improve our quality of life. But at the exhorbitant cost of a ~$250+ electronic lock, that is more prone to power failure, weathering, house and door movement etc, requiring increased maintenance over the mechanical products that have been around for hundreds of years, the cost differences alone, one might think to keep using and relying on maintenance free security.

(source...)

Door Repair - Replacing Broken External Frame Part

 We havent written in our blog for over a month, although we still have been busy with projects.

One project we completed recently, was for a returning client that requested a door repair.

A powerful wind storm had taken hold of his storm door and the door closer failed because the screws that hold the bracket to the frame were not long enough to effectively hold the door to the frame.

The result is what was pictured here, the frame breaking in half, exposing the poor workmanship that contributed to the problem.

 You can see in this second image, where the door frame broke away from the rest of the frame and the exposed hole in the top corner underneath the brickwork.

When we arrived initially to survey the project (free quote), we advised the client that the usual practise was to completely replace the door and frame.

The client inquired as to the cost and we informed them that the average cost in the St Louis region was between $1500 and $2400 depending on the selection of replacement door and frame.

The average cost for a standard external door and frame (no glass window in door) in this region, at discount hardware chains like Menards can be ~$480-$700 depending on color, style and preference. Average installation by a trained and qualified technician can be ~$800 - $1200.

 Notice the shape of the protruding cinder blocks and brickwork.

You can also see how the original door frame is constructed,

The use of round wooden splints to connect the outer part of the original frame to the other section of the frame displays the 'cheapy" construction of an average door and frame.

 This image shows the bottom portion of the brickwork and cinder blocks and the threshold.

The client did contact a few other door installers at our advice to compare costs and called us back because we were the only ones to offer a solution that did not require complete door and frame replacement.

Our cost effective solution was to provide a single piece of hardwood 4x4, custom shaped onsite to the shape of the brickwork and cinder blocks, enabling complete coverage of the exposed cavity.

Because the house was still settling and the foundations shifting (after 50+ years since original construction), the door cavity was crooked and we were required to carefully carve the inside of the hardwood piece to accurately fit around the different protruding bricks and cinder blocks. We used our orbital saw, our power file and hand chisels to expertly carve the inside of the new piece to the required shape of the fitting.

We then attached the outer piece to the inner existing frame with 4" countersunk wood screws and embedded them deeper into the new hardwood single piece, so we could fill the holes after and provide a satisfactory look.

We made sure to have enough length to shape around the threshold too, but the shape of the brickwork still revealed a significantly different size gap at the bottom from the top.

The finished result is not perfect, but significantly improved from before and much longer lasting.

Way more competitively priced than complete door and frame replacement, the total end cost to the client was $870 including all parts and labor.

We caulked around the top and sides of the new trim and frame with water-resistant Silicone caulk (to protect from future wet weathering).

We suggested the client to paint the frame themselves at their convenience (as we are not professional painters). 

An interesting yet time consuming repair, that saved the client a lot of money and looks and operates great,

Remembering back to the beginning of this post, where we mentioned about poor workmanship often being a cause of future issues......

"if you only want to pay peanuts, expect to get monkeys"

and

"the pain of poor quality lasts long after the pleasure of cheap price is obtained"

Keyless Security Has Turned The Corner - No External Interface Means Nothing To Attack

VL464 Versatile Deadlock

Pictured here is the fabulous Versatile Deadlock from Outlocks, the distributor of Knock-N-Lock technology, we have previously discussed here over the years.

Knock-N-Lock technology is an upmarket Israeli designed and manufactured, high-security lock system that is virtually impregnable.

Why?

Because there is no external keyhole. No keyhole means nothing to attack.

This version of the deadbolt lock is available in hardwired or wireless (battery) operated versions.

It is rather industrial looking but is extremely secure because a would-be attacker will have no knowledge of it's location inside your door.

All Knock-N-Lock products operate with the use of a unique external keyfob

This keyfob is the only way to operate the product.

Following is a video that explains the unique locking system uses and how the technology works.

We have been receiving numerous inquiries from customers lately desiring the highest form of security, due to attackers finding methods to beat virtually all other systems they have installed.

There are a number of products made that we can show you after the break.
All operate with the use of the unique fob.

The product is in use in many Asian countries and is finding traction in North America too.

Tellcard Systems EGT - Awesome Standalone Commercial Digital Access Control Product

 The Tellcard EGT is one sensational product. I have fitted 2 of these commercial digital locks of late and they not only look very professional, they are simple to fit, straightforward to program and easy to operate.

I found these products on recommendation through The Society Of Professional Locksmiths, an organization of like minded professional locksmiths, where I am a founding member.

Tellcard offered a promotion a while back to get their products further into the market. Initially I was shy, but thought "why not".

And I'm very pleased with the end results. But more importantly, so are my customers.

 Inside view is as important as outside view, in my opinion because this is the point of view everyday users will see all the time. The Tellcard EGT houses a battery pack that is easily accessible meaning replacing batteries is a simple task.

Life expectancy of the battery pack with typical use (20,000 operations) in a year is about 12 months.

The extra nice feature of this product is that it is not only operable by battery. It also includes connections within for hard wiring, which means you can also hook it up to your internal alarm system and enjoy mains power without requiring to replace batteries. If power fails, the batteries will be your back up power to maintain access control.

 The particular fitting of this unit was to an existing door where someone had previously installed a handle and separate deadbolt. (You can see where the lazy installer used a knock in bolt instead of a correct wooden door installation bolt) This is the outside view of the application.

We were required to drill 2 additional holes, 1 just below the crossbore hole (deadbolt) and one a little farther below where the original commercial lever or knob would have been.

The inside view shows a clearer image of the original holes where the commercial lock once sat.

The end product and fitting, in the first image above displays a beautiful product that fits with the buildings decor and maintains a uniformity with other products in the building.

We also master keyed the mechanical key cylinder in the lever to allow for the building manager to enjoy unfettered access without having to have multiple differing keys for all doors in the building.

Learn more about Tellcard Systems by clicking on the link the source below.

The Society Of Professional Locksmiths continues to grow in stature and offers unique training and fraternity for aspiring locksmiths, click the link above to learn more.









(source...)

ERA Bolts Makes Securing Unusual Doors A Painless Yet Simple Exercise

 A project we completed this week for a medical surgery was to help them comply with modern HIPPA codes that many AHJ's (Authorities Having Jurisdiction) are requiring medical surgery centers, across the country to comply with.

The call was received to find suitable and cost effective locking solutions to secure cabinets in patient examination rooms that hold drugs and supplies that need to be secured from unauthorized access.

Also requested was a solution to secure a set of double doors on a closet used for the centers computer server. The double door closet was unusual because the doors had been split in two, effectively creating four (4) separated leaves. We suggest this was done to minimize the space being used inside the server room, which also doubled as another patient examination room.

Era Bolt Installed Into Upper Leaf

Installing the ERA bolt, which is a door security bolt that uses a standard STAR type key and mortising it into the bottom of the upper door, allows a simple method for connecting the top leaf to the bottom leaf.

The upper leaf on both sides already have roller bolts that hold the top leaves into the steel door frame.

The ERA bolt is a simple install into the bottom of the upper door on both sides.

Chiseling The Strike Plate Into The Bottom Leaf

The bottom leaf of each door already had flush bolts installed to connect the bottoms to the floor beneath, so all that was required was a simple solution to connect top and bottom leaves.
Many other technicians choose to use surface mounted barrel bolts that sit on the inside surface of each door and while this is a simple and cost effective solution also, it means a user is required to reach around the rear of each door to operate the barrel bolts. The ERA bolt solution allows front operation using a standard key and is painless to perform easily.

In the first image above, you can see we installed a lever storeroom lock to match the upper door. Use of the locks individual key is required to open the lock and the handle cannot be left unlocked.
rather than simply providing the operating key to the authorized computer server technician, we decided to install a Supra mechanical combination key box to the metal frame of the door, to house the operating key. This onsite container means that the server technician is not responsible for possessing the operating key and potentially losing it, requiring the lock to be rekeyed. A user with the combination can access the mechanical key box onsite to operate the door lock. This also offer a significantly inexpensive option to battery operated door locks that require the constant need to replace batteries.

Supra Mechanical Combination Key Box Installed To Door Frame

The actual original request was to install cupboard locks to selected cabinets. We used CompX Double Door Hidden Cupboard locks to provide simple security to double door cabinets and simple cupboard locks on cabinets in each patient examination room.

View the attached link for more details on the simplicity and effectiveness of the CompX double door locking solution

How To Secure A Double Door Cabinet Using Only One Lock 

Cannon Safe Digital Lock Replacement

A few weeks ago we were referred by a continuing client (who has been regularly using our services for about 10 years now), to a parishioner who required some professional services to help with her malfunctioning safe.

The safe in question is made by Cannon Safe Company and is a large 2000lb container most often used as a rifle safe but in this case became the safe for the family business records.

The safe was originally purchased about 20 years ago and worked flawlessly for that time. It used a LaGard brand digital safe combination lock with a purpose made digital dial with the company logo (a canon) on it.

Cannon sold the safe with a lifetime warranty and honored that warranty by sending out a replacement lock and digital dial. The only issue was the customer having tremendous difficulty communicating with Cannon customer service. First, they took 30 minutes to answer the phone, then they kept the customer on hold for 3 hours before dropping the call. The customer called back 3 times with the same result each time, before seeking outside assistance.

Her parish piut her in contact with me and I attended the site, rang and spoke with customer service, organized a replacement lock and the whole call took 45 minutes total.

I then attended a week later to complete the install along with some extra jobs requested.

See the images below

First image is safe with original lock on it

Interior image 

Image of interior mechanism

wired to lock

Oldlock on left, new lock on right

Original lock on left, new lock on right

Digital lock button sticker needs to be removed to access the connecting screws 

finished project

Continuous Hinges _ Not Just For Aluminum Shopfront Doors

We are often called in by homeowners to find cost-effective solutions for door repairs.

Often a home owner may be trying to sell their property and an inspection reveals items that require to be fixed before a sale can take place.

The images below show a basement door on a 100+ year home, where the door butts up against the cinder block foundation wall. this door opens inward and as you can see, the top of the door hits the floor joist, not allowing the door to travel fully.

The home owner had attempted to simply replace the hinges, but their attempted repair failed because the wood in the frame was rotten and the screws wouldn't hold.

Typically in this situation, the recommended solution would be to replace the entire door and frame. that can be a costly endeavor, especially because many similar situations require custom made doors and frames, that are often quite dear.

 The first image shows the door detached from the frame at the bottom and you can see the top of the door is taller than the floor joist.

 the second image shows the external side of the same door.

You can see that the old door is in a state of disrepair and the hinge at the bottom has nothing to screw to.

We could have simply moved the hinge higher to a new location, but we couldn't be sure that the wood was not also rotten there too.

Our solution is a long term fix because the continuous hinge we installed (which is more often used to repair shopfront aluminum doors) comes with a 50 year warranty.

The completed installation of the continuous hinge, required us to cut about 4" from the top of the hinge.

The continuous hinge is screwed on like a typical piano hinge, in that it applies completely along the edge of the door and frame.

The correct installation of a continuous hinge ensures long term use. they are held to both door and frame using about 10 screws on each leaf. We installed it to the surface of the door and frame, which allowed us to screw into fresh (not rotten) wood.

The finished result looks great and the door works easily like it should.

Total time for repair ~2 hours.



Continuous hinges are not cheap. But quality products are often pricey and come with sometimes lifetime guarantees.

We continue to install increased quantities of continuous hinges to shopfront aluminum doors, where the top and/or bottom pivots wear quite quickly. A continuous hinge is the most cost-effective and simple repair method for many single door applications and the products are not limited to just shopfront aluminum applications.

Contacting your local locksmith would be your first stop in getting quality professional door repair services, with technicians that can advise the different options.

Meroni Nova Colors And Functions

In answer to a recent customer inquiry about some color finish options, to replace the locksets installed on their doors at home about 20+ years ago, we decided to put together actual live images photographed ourselves in our home studio light box. Not being professional photographers we hope the images below sufficiently display the actual colors you will see if you fit the lock sets to your doors at home or the office....

Click on the image for larger pictures.

 This color finish is Nickel Aluminum finish

Code: N11 Passage Set
Color NA

Also available in N12 Privacy (bathroom) function

 this finish is PE or Pearl Grey (off white)

Code: N11 Passage
Color: PE

Also available in Privacy (bathroom) function

 Interior view

 This image displays the US2B Satin Stainless Steel color

Code: N11 Passage
Color US2B

Also available in Privacy (bathroom) function

 inside view

 This is the white handle with black buttons

Code: N12 Privacy
Color: BO White

Also available in Passage function

 This image displays the N12 Privacy in GG Gun Metal White

Code: N12 Privacy
Color GG Gun Metal White

Also available in Passage function

 inside view

 This image displays the N12 Privacy (bathroom) function in Gun Metal Grey

Code: N12 Privacy
Color: GW Gun Metal Grey

Also available in Passage function

 Inside view

 This image displays the N12 Privacy (bathroom) function is satin brass ALIA (brass buttons and face caps)

Code: N12

Color: US4 ALIA

Also available in Passage function

 inside view

 This image displays the N12 Privacy (bathroom) function in US4 Satin Brass (with black buttons and face caps)

Code N12
Color US4 Satin Brass

Also available in Passage function

 inside view

 This image displays the N12 Privacy (bathroom) function in US26 Alia, Polished Chrome

Code N12 privacy
Color US26 Alia (chrome buttons and face caps)

Also available in N11 passage function

 inside view

 This image displays the N12 Privacy (bathroom) function in US26D Satin Chrome

Note that the color is very similar to the first image above although it is slightly different.

Code: N12 privacy
Color US26 Satin Chrome (with black buttons and face caps)

Also available in N11 Passage function

Inside view


















The colors displayed above are just some of the available colors we have in stock.
We also have Red, Yellow, Blue, Green, Brown, Polished Brass and others.

Many of the colors listed above can also be special ordered in:
N13 - Keyed Entry Version
N14 - Hotel Room Function (outside handle without push button) key only releases latch, inside handle always unlocked for emergency escape,
N15 - Double cylinder (key unlocks from either inside or outside),
N17 - Entry (key unlocks outside button, inside always unlocked),
N20 - Fixed Dummy Knobs (like for a cupboard door that doesnt require locking),
N21 - Outside fixed knob (no button)
N24 - Hotel Indicator Function (outside knob without push button, unlocked only by key; inside thumbturn activates occupancy indicator if provided)\

Normally, all Meroni hardware is custom built to order.
Be aware that there are varying length latches: 60mm (2-3/8"), 70mm (2-3/4"), 80mm (3") and 127mm (5"). latches are available in round ended or square ended faceplates, rebated (rabbited) version, most latches can be ordered with a security deadlatching function too.
Also, there are varying styles and colors of roses too. The standard rose (pictured in the images above) is black nylon. Other roses are available in black metal, satin stainless steel, polished chrome plate, satin brass, brown, antique brass (corinthian).

We do have sufficient stock of most colors in privacy and passage function.

Prices vary based on your custom requirements, contact us for individual pricing.