Strikemaster II To The Rescue - Again

 This week, we were called to another Home Advisor door repair project for a client who experienced door frame failure.

The image to the right here, shows the Strikemaster II product installed to repair the busted door frame. This particular installation required me to check the entire 5' strike plate into the existing frame after removing the weather stripping.

The Strikemaster II used here is NOT the Strikemaster II Pro, which is the updated product. We used the older product because the door, on a house built in the 1960's, was a very tight fit in its opening and the clearance between the door and frame when closed was about 1/16th". The typical gap around the edges of a door within it's frame should be 1/8th". This allows for weathering or frame movement if the house settles.

The second image shows the trim moulding removed. We had some difficulty sourcing replacement moulding because the width of the required moulding was 1-3/4" wide. That size hasnt been produced since at least 1970. All door trim moulding found today is a minimum 2" wide. We managed to source a supplier who could rip a new piece of moulding to enable to install it to the 1-3/4" frame and allow for the trim to neatly fit inside the brick clad wall, without having to damage the existing clad brick.








And the final image shows the new moulding reattached to the frame, ready for painting.

Being that the average door and frame replacement cost in our local region is ~$1100 - $1500 commonly, using a Strikemaster II or the newer Strikemaster II Pro can cut repair costs and time down to less than $300 total.

About To Celebrate Our 12th Anniversary With The Home Advisor/Angie's List Network

Below you can see our page hosted on Home Advisor. We have been continued members since 2007 of the Home Advisor network of service professionals.

When the parent company of Home Advisor acquired Angie's List late last year and completed merging the two networks together, the created a behemoth in the lead generation market, a market that has seen meteoric rise since Google began their Adwords program.

The early days of lead generation began with companies developing advertisements using the Google Adwords platform. At that time PPC (pay per click) was in it's infancy and costs for clicks were around 1-5 cents per click. 

Enter lead generation marketers.

They discovered methods through the Google architecture to use prime positioning in Adwords to build their lead generation networks, effectively raising the cost per click to prices unsustainable by small businesses alone. Then they could sell memberships to service providers and charge for customer's contact details. This opened a modern market formerly controlled by Yellow Pages and other directory advertising portals. What makes gthese lead generation companies money is the ability to sell these leads to multiple service professionals at rates significantly less than those service professionals would have to spend to acquire customers in ways past.

We are lucky enough to have received 380+ reviews from customers we have served with most being 5 star, Please enjoy the page shown below and feel free to comment in the box provided beneath.

(source...)

Door Frame Repair - After Break In, Using Strikemaster II

We just completed another repair project on behalf of a property management company, where the tenant had been the victim of a burglary attempt where the door was kicked in and the frame failed.

We are not painters and advise our clients of such during the estimate phase. We are happy to perform the required repairs quickly and at the residents convenience.

Below you can see the "before" images and understand what we were about to encounter.

 This view is from the Garage side of the door we were to repair.

We advised the property manager that future painters would also be required to repair the walls and gaps around the exterior side of the frame.

Whomever had rehabbed this place, obviously decided to cut corners to save money (a common action of house flippers)

 You can see the damage to the interior trim, the location where the strike for the entrance set and deadbolt has completely been broken out. Also the paint on the inside wall was torn away in the attack.

Here is a better angle of the damaged door frame.


This project type is one of our common project requests. Customers requiring to fix a broken door frame after suffering from door frame failure resulting from a kick-in attack.

When considering to repair or replace the entire door and frame, understanding that the average cost in the local market to supply and install a new door and frame can be ~$1100 - $1500 for a quality professional to install a standard door and frame, it becomes worthwhile to seek alternative solutions that reduce cost while upgrading the security of the location.

Enter the Strikemaster II. This phenomenal security and repair product is expertly designed and manufactured in the USA. A Safe Homes is a company based in the Carolinas that is on the forefront of product development, especially when it comes to safety, security and protection of the doors we all use daily.

This next image shows our completed repair using new trim and the Strikemaster II expertly installed,

Comparing this to the before pictures shows the entire gaping hole left by the door kick-in (where the entrance set latch and deadbolt go), is now completely hidden.

You can still see the area that requires painting, another project for another tradesperson for another time.

 This image shows a different angle of the new trim and the still damaged paintwork.

Professional painter and decorators will first use caulk to seal the gaps between connecting pieces, Some painters will also remove the trim and paint the wall, then re-install the trim, creating more professional looking lines, that can then be caulked after the paint dries

This final image of the completed project shows a better view of the Strikemaster II. the unique patented product uses a 2 part process to create a "laminating" effect. Also the outer steel uses a lip designed to hook around the edge of the door frame. This lip is an integral part of the product design, because it increases the strength of the product when being attacked.

Strikemaster II also uses stainless steel screws about 3" long, that tie the product, through the flimsy thin frame, to the stud behind, effectively anchoring the new product and providing almost impenetrable strength.

Being 5' long and using 8-10 stainless steel screws, combined with the lip and the laminating effect, the product is very strong because a new attempt to kick-in the door will spread the weight applied by the kicking action across a wider surface.


It is unfortunately, all too common that a great many homeowners, property managers, residents and tenants just are not proactive enough to anticipate future events like door frame failure, by installing products like this in advance of an event. Perhaps purchasing new designer shoes is of greater importance than providing security protection for your family and colleagues.

Speaking to your local locksmith can provide you with some great knowledge and experience to effectively mitigate issues and events down the road.

This entire repair project cost about $300.00 and they could maintain their existing door and frame. Compare that to the average door and frame replacement cost, that does not apply similar door frame strengthening to prevent another kick-in attempt and you effectively spent almost a thousand dollars more without increasing security and protecting your family and possessions satisfactorily.

Strikemaster II Pro - Still The Best offering To Repair And Prevent Door Frame Failure (Post Revisited - December 2009)

Back in 2008, we first posted about the fabulous Strikemaster II product. A product designed, manufactured and marketed by a colleague from North Carolina.

We have been continually selling and recommending this product for many years now, because it is one of the few products of it's kind that very inexpensively will repair your door after a door kick in without requiring you to replace the entire door and frame.

Below, find one of our first posts about this product and the original video that was made to explain it's features.

Over they last 10 years, we have installed hundreds of these products to customers who have suffered the heartbreak of door frame failure. I guess our clients love the fact that such a competitive priced American made product is widely available to correctly and professionally repair their door frames, without requiring they to spend significantly more for a new door and frame, that essentially will not protect them from similar attacks in future.



December 3, 2009

Strikemaster II Pro

This video shows exactly how and why the Strikemaster 11 product is essential to securing homes and residences. This particular video is almost 4 years old and the price displayed there is incorrect.

The new Strikemaster 11 Pro product is an improvement to the design of this fantastic product and is available now. Whether you decide to order it direct from the manufacturer or through any of their dealers, the price is identical.

We expect stocks of the newer model in about 3 weeks time.

We previously talked about the Strikemaster 11 in March 2008.

(source...)



A list of our articles about this product and similar offerings can be viewed here.

Bolt Buddy - Proactive Security Product Made In Canada Prevents Door And Frame Failure

Always Affordable Locksmiths Ltd are a family owned professional locksmith company  in Canada that produce the fabulous Bolt Buddy deadbolt protection product.

The product, as described in the video above, is an effective security protection device that can thwart the most typical method of door break ins - kicking the door down.

We have been touting the strength and usability of the fabulous Strikemaster II Pro Door Frame Protection device for many years now and continue to offer the product as one of the best protection and jamb repair products on the market. American made and from North Carolina, The Strikemaster II Pro is unsurpassed in it strength, design and quality.

While we do find that some customers are proactive enough to install the Strikemaster II Products, most appear to wait until the horse has bolted before doing anything to "fix" their issues. This means that most customers wait until they have been broken into to install quality security protection products.

When you compare the average cost of replacing an entry door and frame in today's market to the sense in using the Bolt Buddy or the Strikemaster II Door Protection products, it really is a no-brainer. Yes, you can purchase a new door and frame at the big box store for $300-$500 and pay a cheapo handyman another $300-$500 to install it, but remember,"if you only want to pay peanuts, expect to get monkeys". The average cost for a professional door installer in my local market to supply and install a new entry door and frame, depending on desired model, is between $1200 - $1500.

The Bolt Buddy is a product designed to offer tentamount security at a fraction of the cost compared to other products. The ease of installation is attractive because a DIY'er or locksmith can easily install them in minutes.

I receive many calls to repair doors after being broken into. Over the last 10 years, I think it is one of my most called for project requests, to repair a kicked in door. I swear by the quality of the Strikemaster II Pro product. I am a user of it myself and it has protected my home from an attempted break in, so I  am very happy to recommend it, from first hand experience.

I am really impressed with the simplicity in the design of this Bolt Buddy product. The small footprint and ease of installation will protect entrance doors for many years. The security protection of your family and your belongings is paramount in maintaining a happy balanced life and using a Bolt Buddy will help to ensure you are protected.

We are not a reseller yet of this product, but hope to be soon. It is not expensive and worth considering if you're proactive about the security of your home and family.

(source...)

St Louis Home And Garden Show - March 3 - 6, 2015 Booth #3511

We are very pleased to invite our many customers and friends to come and visit with us at the St Louis Home And Garden Show, to be held at the America Center in downtown St Louis from March 3 - 6, 2015.

This 4 day event provides local and interstate homeowners, residents, architects, home builders, interior designers and renovators with the opportunity to view, in person, many of the time tested and latest products and services available to improve your home, garden and office environments and buildings. The ability to chat with experts about their offerings can help to learn first hand, the benefits of many modern products and services available in the greater St Louis region.

We will be very pleased  to greet you at our Booth #3511, located to the right of the main entrance as you walk in.

We will be particularly showcasing our range of modern contemporary Meroni Door Hardware displaying many color options and styles including...

Nova

Combina

Forma

Pigio 1

Pigio 2

Pigio 3

many of the above products can also be embossed with personalized logos or artwork, further increasing the unique and personalized look of your chosen hardware.

The Nova, Combina and Forma models can also be ordered in SC1 keyway, making them compatible with standard Schlage products. That means you can use them with some of your existing house keys.

Bilock Deadbolt And Strikemaster II Prevent Break In Attempt

Even us locksmiths are sometimes preyed upon by nefarious people.

I arrived home just now, from running a service call, to find this picture of my lockbox smashed open.

Luckily there was no key inside.

I also saw a boot mark on the door, where they might have attempted to kick-in the door. About 3 years ago, I installed one of my Strikemaster II door frame protectors to this door frame and apparently it has performed it's task perfectly.

The Bilock deadbolt prevented picking or bumping and the Strikemaster II prevented the frame from being destroyed.

No losses occurred except for the one elcheapo lockbox.


So.....this is one of the reasons we continue to sing the virtues of the products we sell and recommend.
We choose to practise what we preach. If it's good enough for our select customers, it is also good enough for us too.

We have been designing, constructing and installing Bilock products for over 25 years and across 4  continents. It is one of the best products aimed at maximizing your security, while minimizing potential threats from picking, bumping or even unauthorized key duplication.

We became a distributor for the fabulous Strikemaster II Pro, about 5 years ago and have installed a great number, usually to customers who have already suffered a door frame failure resulting from their door being kicked in. The Strikemaster II Pro is one of the best methods for repairing a failed door frame, without the need to replace your entire door and frame. (Average cost in the greater St Louis region to replace a standard entrance door and frame is about ~$1200.00 - ~$1500.00)

I must say, I am very pleased that these products have lived up to their hype.

Robbers Kick In Door Of St. Louis Home, Shoot Man

A June 19, 2015 article in the St Louis Post Dispatch tells about a homeowner in North St Louis County who was shot by intruders after they kicked down the front door.

Luckily the homeowner survived the brutal attack.

According to the article, the robbers were looking for guns and money.



This story highlights the need for better door protection products, purposely designed to thwart door frame failure.

We have been offering the fabulous Strikemaster II Pro Door Frame protection and repair product for almost 5 years now and have installed a significant number to doors after the door frame has already been damaged. We have sold and installed the product to concerned homeowners who proactively want to protect their homes and families with so far, no reported failures of the product.

We originally talked about the Strikemaster II Pro in this article back in December 2009.

One instance that comes to mind was when a customer called me on Thanksgiving 2010 after her front entrance was broken down by the fire department answering a smoke detector alarm call. She had left some soup on her stove turned down to low, to keep warm while she darted out to the shop. Smoke from the stove got into the smoke detector signalling the fire department who attended very quickly and broke down the door. Because she had a $4000 door, she was quoted by multiple contractors significantly expensive prices to replace her door and frame, however no one was able to come out for a week. She couldnt leave her door unsecure and was put off by the unrealistically expensive estimates. She got on to me through the Home Advisor network and I contacted her immediately, informed her about the Strikemaster II product, sent her to the product video on my website (in the above link), estimated the paltry cost and waited for her return call. She called back 15 minutes later and booked me for the next day. We attended the site, installed the Strikemaster II, which completely repaired her existing frame and covered all the damage, without having to replace her door and frame. Needless to say she was very pleased.

We are currently out of stock of the product, with new supplies expected in the next week.

(source...)

Home Invasion Statistics Across USA

Home invasions across the USA are increasing supposedly due to the poor economy and the ease at which perpetrators are learning to ply their trade, thanks in part to the enormous amount of information spreading across the internet.

There are a few companies here that are producing unique quality products aimed at preventing home invasions and identifying criminals.

StranDNA is one such company that produce a modern itteration of the ages old door chain.

Strikemaster II is produced by A Safe Homes International, designed to repair a broken door frame casing while at the same time preventing future door kick ins.

OnGard Door Brace is produced by an Atlanta based company designed to prevent door entry.

Bilock is an internationally acclaimed guaranteed 100% bump proof and virtually pick proof key system with keys that cannot be copied.

Many of the above products cannot be purchased at the big box stores, only from approved industry professional locksmith companies.

For further information on any of the above listed products, please contact us at your convenience.

Locks Are Only As Strong As The Doors And Frames Holding Them

Recently came across this fascinating video about how easily firefighters break down entrances.

Conventional thinking, with regard to security products and locking systems, rarely actually take into account the strength of the door or jamb. Sometimes, it may not matter how expensive a lock you install on your entry, a determined burglar with the right tools will cause such destructive entry all too easily.

Video after the jump.

ABC News 10 New York - Deceiving Viewers

ABC News 10 New York back in early November started airing some odd interviews with a former burglar, in a rather odd attempt to get advice to consumers about how to secure your homes.

While some of the advice is on par, it is troubling and obvious that this "expert" does not know the law or life safety codes regarding double cylinder locks and why they should not be used.

He goes on to suggest other ideas as well that are a little ambiguous also. He suggests that alarms are the difference between security and not. Nothing is further from the truth. Alarms cannot and can never provide any form of physical security protection.

Virtually all burglars know that if they set off an alarm to an unoccupied property, sure the authorities will turn up eventually, but the burglar just hides out of sight from the authorities. Usually the authorities will deem the alarm a false alarm, write the owner a bill for their attendance and leave the premise. The burglar comes back a second time and may indeed set the alarm off again, but is secure in the knowledge that the authorities are not going to return quickly to that property because they think it is false alarming. The burglar then does their damage and the homeowner suffers the loss. Often insurance companies will likely reject a claim because the authorities have written a false alarm ticket.

This "expert" suggests to use a "charliebar" in a sliding door. This is a suggestion however all burglars know how to easily and quickly bypass a charliebar. The suggestion of a broom handle or 4x2 in the track is often better, but the best suggestion is to put a self tapping screw in the top of the track to prevent the door from being lifted.

The only suggestion of merit in the article (see source below) is using 3" screws or better strike plates, but this is the primary reason the Strikemaster II Pro is such a formidable foe to burglars.

When it comes to windows, this "expert" suggested double cylinder locks. Double cylinder locks are illegal in almost every jurisdiction in the USA, if used on primary entry doors. The best suggestion is to use products like ShatterGard window security film, that actually prevent a window from being broken.

Shame on you ABC 10 New York for misleading consumers with advice from a burglar instead of a professional locksmith security expert.

(source...)

ShatterGard - Security Film

We recently received our test sample of this fabulous product and are putting it through our internal tests.

So far, it seems to be the real deal.

The incidence of break in is rampant across America and due to many Authorities Having Jurisdiction (AHJ's) insisting on property owners NOT using double cylinder deadbolts to secure entry ways that have glass near the door locks (life safety and building code regulations), products like ShatterGard, that actually prevent the smash and grab technique, are being sought for more widely.

If you have ever been broken into, more than likely you have suffered either a smashed window or a door kicked in. The likelihood of having your locks picked, bumped or destroyed, while certainly increasing across society, is much lower than experiencing a kicked in door frame or glass breakage.

Using the ShatterGard product and combining it with a Strikemaster II Pro door frame casing reinforcer, significantly decreases the likelihood of these two primary methods of entry.

We are still testing ShatterGard and are looking to include in our inventory in the very near future.

Stay tuned!

(source...)

Strikemaster II Pro - Product Update

A Safe Homes International has recently released some exciting new upgrades to the Strikemaster II Pro line of Door Frame Security products.

We have been selling this terrific product, well over 4 years now and have installed numerous units to people whose homes have suffered a break in due to door frame casing failure.

The updated product line, now includes a patent pending model designed to secure french (double) doors.

Also included in the line is a Door Edge Pro, designed to further strengthen the mechanism on the door edge. These simple, yet ingenious improvements further bolster the product line and to top things off - they have reduced the price for these fabulous products.

In this economy, where many manufacturers seem to be increasing their prices for their products, when the market is still suffering from economic sticker shock, along comes a quality inventor/manufacturer who releases product at lower pricing.

The incidence of break & enter is increasing across the world, as shown in our periodic crime statistics posts. Strikemaster products are purposely designed to offer the protection you need at a fraction of the prices that other makers want to charge.

Beware of copy cat products. Strikemaster products are proudly designed and manufactured in the USA.

View their new website in the source below for explanation videos and demonstrations of the new products.

(source...)

The Door Club

The residential security market is an ever changing and growing market. More and more unique products are surfacing that may enable residents to better protect themselves, their families and their properties.

In past articles here, we have discussed a number of products that are designed to prevent door kick ins.

The Strikemaster 11 Pro is our favored product for securing a residential entry door from the instance of door frame failure, the symptom that occurs when someone tries to kick the door down. It allows the door to be secured when you leave your home or dwelling.

A few days ago we posted a video about the OnGard door brace. A unique product designed primarily to thwart door kick-ins, while you are home, effectively thwarting home invasions. While the product is indeed a revolutionary idea and made from the highest quality materials, we recently came across another variation of the product from a well known manufacturer of other security products. The Door Club (pictured above), effectively does the same thing as the OnGard brace system. It is a competitively priced option that may appeal to consumers for it's aesthetic appearance and simplicity of use/storage.

It is easily installed by drilling one hole into floor surfaces such as wood, ceramic, carpet, tile, marble and granite. The Door Club is designed to withstand two tons of direct force, enough to keep would be intruders from kicking the door open.

Easily installed, the device comes with all installation hardware and instructions, including the mounting storage bracket that attaches to the door itself.

$24.99

(Source...)

State Farm Insurance - Opinion On Best Door Locks

I read with interest an article (in the website listed in the source below), offering an opinion about the quality of various types of door locks and systems that enable better security in residential applications.

From the site...

Door Locks From a Burglar's Perspective

Burglars prefer to break into a home through a door because it is quick and easy.

A good quality lock is a deterrent. When intruders are interviewed about the selection of a target, many say seeing quality deadbolt locks will cause them to move on to another house.

A burglar can enter the home through a door using several methods:

• The door can be left unlocked.
• Doors can be kicked in.
• Door locks can be picked.
• Door locks can be hammered until they fall off.

All Time Leading Pages Viewed

Ok folks! Here is what you have asked for. The all time leading pages viewed at this site.

The Home Page

Cowdroy P697 Pocket Door Lock

Biometric Thumblock

Changing Locks

Bilock 1

Bilock 2

Bilock 3

Bilock 4

Keys To Cars

Strikemaster 11

Car Remote Broken

Pocket Door Locks

Why Make Car Keys

Cost To Change Locks 1

Cost To Change Locks 2

Urgent Need For A Locksmith In St Louis

These are the past 4 years results we are looking at. 400,000+ pageviews might yield data that people are searching for. Using these results as a guide to future marketing is proving worthwile. It allows us to get inside of the minds of our prospects, to help us write articles that are of greater interest to searchers.

Top 10 Searches for April 2010

This website has been very kind to me in the last few years with an average of 300-500 search hits every month since 2006. There are probably some good reasons for this luck, but I suggest it is likely because of the significant amount of original content included here-in.

I have decided to try to include a monthly post highlighting the 10 most popular searched for terms that led viewers to this site.

These search results are gathered from my Google Analytics reports.

As you can see, there are significant numbers of searches for keyword terms surrounding keyed pocket door locks.

Our Cowdroy P697 Pocket Door Lock with Key, is proving (not surprisingly) popular in it's genre.

Other popular keyword search terms in the past month, include Schlage Securekey Problems.

Schlage Securekey is a new product recently released by Schlage in answer to and to compete with Kwikset's Smart-Key product line. The widespread discussion and marketplace concern about the lock bumping phenomenon, has forced some lock manufacturers to update their product designs.

We have been conducting our own tests of the Schlage Securekey product and anticipate presenting some interesting findings in the not too distant future.

Strikemaster II seems to be continuing it's popularity in searched for terms. The product is beautifully designed to prevent door frame casing failure, effectively preventing the most common break-in method of door kick-ins.

Expect to see more articles about the popular searched for keyword phrases in upcoming posts.

Cal-Royal - Bilock Hybrid $98.00

Pictured to the left is the Cal-Royal LSD-01 Grade 3 Residential deadbolt.

Construction Features:

1. Mounting screws 8-32 X1 1/2" (Sgl cyl.)8-32 X 2" (Dbl cyl.)
2. 2 1/2" dia. tapered cylinder guard and solid metal insert, turns free with any removal attempt.
3. 2 1/2" dia. tapered cylinder guard and solid metal insert, turns free with any removal attempt.
4. One-piece solid brass housing for extra strength.
5. Hardened steel tail piece.
6. Pick resistant solid brass 6 pin tumbler plug "C".
7. Brass keys.
8. Sturdy, all steel latch case and mechanism.
9. Full 1" throw deadbolt.
10. Latch and strike screws are 8-32x1" combination wood/machine for applications on wood, metal or fiberglass doors and frames.
11. Strike and box.

As the largest Bilock Extreme Security dealer in the mid-west, we are now producing limited numbers of our Hybrid Cal-Royal/Bilock Grade 3 deadbolt. By replacing the standard cylinder that comes with the LSD-01, with a Bilock Extreme Security Cylinder and 2 keys, we can offer a totally bump proof and virtually pick proof lock with keys that cannot be duplicated for about $98.00 (depending on the color).

When you compare the different brands of deadbolts currently on the market, most will vary in price due to the ANSI grade, the brand name and the quality of construction.

Many front or back doors on homes across America, already use Kwikset or Schlage Grade 3 deadbolts as the common product. The average price for these brand name products are between $35 and $70. Considering they do not offer any protection from key duplication, bump or pick attempts, makes this Bilock/Cal-Royal Hybrid combination, a very affordable solution to protecting your family and property.

We will also be introducing a Bilock/Cal-Royal Hybrid deadbolt and Strikemaster II Pro door frame strengthener package, soon. This will enable you to secure your doors with the finest lock system available and combine it with the best door frame strengthener on the market. Complete door kick-in protection and pick/bump proof locks for $199.95. Unbeatable Value!

To purchase this limited edition product at these unbeatable prices, please email us now.

Strikemaster II Pro - New Shipment Just Arrived

Pictured here is a typical broken door frame/jamb, after a kick-in attack.

According to discussions I have personally had with members of local law enforcement agencies, this is the most typical method of break ins they come across.

Today, we received our first shipment of the new and improved Strikemaster II Pro door frame strengtheners.

In the second picture you can see the new version and how it looks when installed.

The new version includes an extended lip allowing better engagement of the entrance lock latch mechanism. It also includes a couple of knock out pieces for the deadbolt mechanism, to allow for varied installations (deadbolt is either fitted above or below a typical entrance set). Each unit still comes with ten (10) three inch (3") screws that connect the unit to the stud behind the frame.

I have been installing locks and systems for over 25 years in multiple countries across the world and typically, I have seen very similar entry techniques, just about everywhere.

Most entrance doors in the USA are metal clad wooden doors using typical key-in-knob entrance sets, sometimes with deadbolts also fitted above or below.

In cases of door frame failure (like pictured above), rarely has the actual door hardware failed. Even the cheap quality locksets can stand up to abuse, but the door strike (where the lock closes into) always seems to fail.

Using a Strikemaster II Pro, not only prevents door frame failure, but it repairs the damages often resulting from a kick-in.

Many door repairers will rarely quote to repair an existing door and frame because often the costs in labor are equivalent to or close to the costs of total replacement. Many door centers sell only complete doors and frames and they vary in cost from ~$500.00 for parts only. I have spoken with many builders and carpenters and builders about their average installation prices and the common reply is around $500.00 to $750.00 for labor.

The Strikemaster II Pro sells for $99.95 (plus tax). Installation usually takes a half hour with my installation and call out fee of $55.00.

Repairing your kicked-in door for less than $200.00 is smarter and more cost effective than a total door replacement.

Strikemaster II Pro

This video shows exactly how and why the Strikemaster 11 product is essential to securing homes and residences. This particular video is almost 4 years old and the price displayed there is incorrect.

The new Strikemaster 11 Pro product is an improvement to the design of this fantastic product and is available now. Whether you decide to order it direct from the manufacturer or through any of their dealers, the price is identical.

We expect stocks of the newer model in about 3 weeks time.

We previously talked about the Strikemaster 11 in March 2008.

(source...)